[    0.977602] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xf8577000, 90:1b:0e:46:ee:97, XID 0c000880 IRQ 28
[    0.977604] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.977635] scsi host4: ahci
[    0.977685] ata1: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a100 irq 27
[    0.977686] ata2: DUMMY
[    0.977686] ata3: DUMMY
[    0.977687] ata4: DUMMY
[    0.977689] ata5: SATA max UDMA/133 abar m2048@0xf7d1a000 port 0xf7d1a300 irq 27
[    0.990349] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.003961] [drm] PipeC fused off
[    1.003967] [drm] Memory usable by graphics device = 2048M
[    1.003969] checking generic (e0000000 8d0000) vs hw (e0000000 10000000)
[    1.003969] fb: switching to inteldrmfb from VESA VGA
[    1.003990] Console: switching to colour dummy device 80x25
[    1.004055] [drm] Replacing VGA console driver
[    1.010197] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.010197] [drm] Driver supports precise vblank timestamp query.
[    1.012716] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.056714] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.072728] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.073030] acpi device:56: registered as cooling_device9
[    1.073077] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    1.073097] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    1.073124] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
[    1.076672] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.118963] fbcon: inteldrmfb (fb0) is primary device
[    1.119014] Console: switching to colour frame buffer device 240x75
[    1.119055] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.205077] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.205078] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.205366] hub 1-1:1.0: USB hub found
[    1.205489] hub 1-1:1.0: 4 ports detected
[    1.217910] usb 3-2: New USB device found, idVendor=046d, idProduct=c00e
[    1.217912] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.217913] usb 3-2: Product: USB-PS/2 Optical Mouse
[    1.217914] usb 3-2: Manufacturer: Logitech
[    1.225106] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.225107] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.225340] hub 2-1:1.0: USB hub found
[    1.225443] hub 2-1:1.0: 6 ports detected
[    1.291850] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.291865] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.294708] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.294711] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.294712] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.295314] ata5.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[    1.296695] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.296697] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.296699] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.297297] ata5.00: configured for UDMA/100
[    1.318343] ata1.00: ATA-8: ST500LM021-1KJ152, 0001SDM1, max UDMA/133
[    1.318344] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.336644] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[    1.357137] ata1.00: configured for UDMA/133
[    1.357389] scsi 0:0:0:0: Direct-Access     ATA      ST500LM021-1KJ15 SDM1 PQ: 0 ANSI: 5
[    1.388829] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.388877] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.388879] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.388892] sd 0:0:0:0: [sda] Write Protect is off
[    1.388894] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.388920] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.390863] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB01 PQ: 0 ANSI: 5
[    1.416279] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.416280] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.416426] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.416490] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.433782]  sda: sda1 sda2 < sda5 >
[    1.434401] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.498101] usb 3-3: New USB device found, idVendor=148f, idProduct=3070
[    1.498102] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.498103] usb 3-3: Product: 802.11 n WLAN
[    1.498104] usb 3-3: Manufacturer: Ralink
[    1.498104] usb 3-3: SerialNumber: 1.0
[    1.616649] usb 3-9: new low-speed USB device number 4 using xhci_hcd
[    1.636643] tsc: Refined TSC clocksource calibration: 3591.681 MHz
[    1.636649] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33c5a0b45fc, max_idle_ns: 440795301468 ns
[    1.762124] usb 3-9: New USB device found, idVendor=1a2c, idProduct=2d23
[    1.762125] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.762126] usb 3-9: Product: USB Keyboard
[    1.762126] usb 3-9: Manufacturer: USB
[    1.767288] hidraw: raw HID events driver (C) Jiri Kosina
[    1.776161] usbcore: registered new interface driver usbhid
[    1.776162] usbhid: USB HID core driver
[    1.778437] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:046D:C00E.0001/input/input3
[    1.778526] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-2/input0
[    1.778627] input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:1A2C:2D23.0002/input/input4
[    1.836857] hid-generic 0003:1A2C:2D23.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:14.0-9/input0
[    1.837715] input: USB USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.1/0003:1A2C:2D23.0003/input/input5
[    1.896848] hid-generic 0003:1A2C:2D23.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:14.0-9/input1
[    2.002975] random: fast init done
[    2.155761] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.660691] clocksource: Switched to clocksource tsc
[    2.904296] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.904389] systemd[1]: Detected architecture x86.
[    2.909681] systemd[1]: Set hostname to <svitkin-D3240-B1>.
[    3.356334] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.356379] systemd[1]: Listening on Journal Socket.
[    3.356399] systemd[1]: Listening on Syslog Socket.
[    3.356405] systemd[1]: Reached target Remote File Systems (Pre).
[    3.356410] systemd[1]: Reached target Remote File Systems.
[    3.356465] systemd[1]: Created slice User and Session Slice.
[    3.356486] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.856605] lp: driver loaded but no devices found
[    3.980035] ppdev: user-space parallel port driver
[    4.343037] random: crng init done
[    4.763755] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    4.852204] systemd-journald[258]: Received request to flush runtime journal from PID 1
[    5.458700] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20160930/utaddress-247)
[    5.458704] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.458707] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20160930/utaddress-247)
[    5.458708] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.458709] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20160930/utaddress-247)
[    5.458711] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20160930/utaddress-247)
[    5.458712] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.458713] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20160930/utaddress-247)
[    5.458714] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20160930/utaddress-247)
[    5.458716] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.458716] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.564161] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.594359] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.594360] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.594361] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.594361] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.594362] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.719320] intel_pch_thermal 0000:00:1f.6: Sensor can't be enabled
[    5.719362] intel_pch_thermal 0000:00:1f.6: pci device failed to probe
[    6.751078] intel_rapl: Found RAPL domain package
[    6.751079] intel_rapl: Found RAPL domain core
[    6.751080] intel_rapl: Found RAPL domain uncore
[    6.751080] intel_rapl: Found RAPL domain dram
[    6.751082] intel_rapl: RAPL package 0 domain package locked by BIOS
[    6.751085] intel_rapl: RAPL package 0 domain dram locked by BIOS
[    7.311955] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    7.426278] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
[    7.426340] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[    7.426392] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[    7.463972] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC671: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:line
[    7.463973] snd_hda_codec_realtek hdaudioC1D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.463974] snd_hda_codec_realtek hdaudioC1D2:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    7.463975] snd_hda_codec_realtek hdaudioC1D2:    mono: mono_out=0x0
[    7.463975] snd_hda_codec_realtek hdaudioC1D2:    inputs:
[    7.463976] snd_hda_codec_realtek hdaudioC1D2:      Front Mic=0x19
[    7.463977] snd_hda_codec_realtek hdaudioC1D2:      Rear Mic=0x18
[    7.463978] snd_hda_codec_realtek hdaudioC1D2:      Line=0x1a
[    7.472014] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    7.472073] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    7.472128] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    7.472181] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    7.472237] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[    7.866707] audit: type=1400 audit(1507212340.464:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=640 comm="apparmor_parser"
[    7.866709] audit: type=1400 audit(1507212340.464:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=640 comm="apparmor_parser"
[    7.890485] audit: type=1400 audit(1507212340.488:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=637 comm="apparmor_parser"
[    7.890487] audit: type=1400 audit(1507212340.488:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=637 comm="apparmor_parser"
[    7.890488] audit: type=1400 audit(1507212340.488:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=637 comm="apparmor_parser"
[    7.890489] audit: type=1400 audit(1507212340.488:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=637 comm="apparmor_parser"
[    7.892218] audit: type=1400 audit(1507212340.488:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=641 comm="apparmor_parser"
[    7.909885] audit: type=1400 audit(1507212340.508:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=636 comm="apparmor_parser"
[    7.909886] audit: type=1400 audit(1507212340.508:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=636 comm="apparmor_parser"
[    7.987242] audit: type=1400 audit(1507212340.584:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=645 comm="apparmor_parser"
[    8.492383] usb 3-3: reset high-speed USB device number 3 using xhci_hcd
[    8.642861] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[    8.652543] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3070 detected
[    8.701706] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.701908] usbcore: registered new interface driver rt2800usb
[    8.875785] rt2800usb 3-3:1.0 wlx0025224c21df: renamed from wlan0
[    9.380224] Adding 8285180k swap on /dev/sda5.  Priority:-1 extents:1 across:8285180k FS
[   13.750272] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   13.902475] r8169 0000:02:00.0 enp2s0: link down
[   13.902534] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   14.127910] IPv6: ADDRCONF(NETDEV_UP): wlx0025224c21df: link is not ready
[   14.127938] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   14.244477] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   14.410799] IPv6: ADDRCONF(NETDEV_UP): wlx0025224c21df: link is not ready
[   14.777184] IPv6: ADDRCONF(NETDEV_UP): wlx0025224c21df: link is not ready
[  212.123229] IPv6: ADDRCONF(NETDEV_UP): wlx0025224c21df: link is not ready