[    1.342257] Scanning for low memory corruption every 60 seconds
[    1.342750] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.342802] audit: initializing netlink subsys (disabled)
[    1.342832] audit: type=2000 audit(1461612940.340:1): initialized
[    1.343245] Initialise system trusted keyring
[    1.343418] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.345840] zbud: loaded
[    1.346113] VFS: Disk quotas dquot_6.6.0
[    1.346168] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.346924] fuse init (API version 7.23)
[    1.347128] Key type big_key registered
[    1.347624] Key type asymmetric registered
[    1.347629] Asymmetric key parser 'x509' registered
[    1.347689] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.347732] io scheduler noop registered
[    1.347736] io scheduler deadline registered (default)
[    1.347784] io scheduler cfq registered
[    1.348176] pcieport 0000:00:1c.0: enabling device (0001 -> 0003)
[    1.349196] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.349205] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.349250] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.349252] vesafb: scrolling: redraw
[    1.349255] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.349275] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 3072k, total 3072k
[    1.349415] Console: switching to colour frame buffer device 128x48
[    1.349441] fb0: VESA VGA frame buffer device
[    1.349463] intel_idle: does not run on family 6 model 23
[    1.349789] ACPI: AC Adapter [AC] (on-line)
[    1.349899] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0C:00/input/input0
[    1.349905] ACPI: Power Button [PWRB]
[    1.349960] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0D:00/input/input1
[    1.349979] ACPI: Lid Switch [LID0]
[    1.350034] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0E:00/input/input2
[    1.350037] ACPI: Sleep Button [SLPB]
[    1.350102] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.350104] ACPI: Power Button [PWRF]
[    1.350241] Monitor-Mwait will be used to enter C-1 state
[    1.350247] Monitor-Mwait will be used to enter C-2 state
[    1.350252] tsc: Marking TSC unstable due to TSC halts in idle
[    1.350257] ACPI: acpi_idle registered with cpuidle
[    1.351444] thermal LNXTHERM:00: registered as thermal_zone0
[    1.351447] ACPI: Thermal Zone [TZ01] (55 C)
[    1.351498] GHES: HEST is not enabled!
[    1.351704] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.340071] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa20a18340, max_idle_ns: 440795203293 ns
[    2.908086] ACPI: Battery Slot [BAT0] (battery present)
[    2.908334] Linux agpgart interface v0.103
[    2.908436] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[    2.908460] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    2.908751] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    2.908947] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    2.913110] brd: module loaded
[    2.915044] loop: module loaded
[    2.915375] libphy: Fixed MDIO Bus: probed
[    2.915379] tun: Universal TUN/TAP device driver, 1.6
[    2.915381] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.915454] PPP generic driver version 2.4.2
[    2.915557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.915564] ehci-pci: EHCI PCI platform driver
[    2.915837] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    2.915848] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    2.915864] ehci-pci 0000:00:1a.7: debug port 1
[    2.919787] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    2.919805] ehci-pci 0000:00:1a.7: irq 21, io mem 0xd6704c00
[    2.928022] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.928076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.928079] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.928081] usb usb1: Product: EHCI Host Controller
[    2.928084] usb usb1: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
[    2.928086] usb usb1: SerialNumber: 0000:00:1a.7
[    2.928275] hub 1-0:1.0: USB hub found
[    2.928285] hub 1-0:1.0: 2 ports detected
[    2.928633] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.928641] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.928656] ehci-pci 0000:00:1d.7: debug port 1
[    2.932573] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.932586] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd6704800
[    2.944051] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.944099] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.944102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.944104] usb usb2: Product: EHCI Host Controller
[    2.944107] usb usb2: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
[    2.944109] usb usb2: SerialNumber: 0000:00:1d.7
[    2.944299] hub 2-0:1.0: USB hub found
[    2.944308] hub 2-0:1.0: 8 ports detected
[    2.944697] ehci-platform: EHCI generic platform driver
[    2.944723] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.944730] ohci-pci: OHCI PCI platform driver
[    2.944747] ohci-platform: OHCI generic platform driver
[    2.944761] uhci_hcd: USB Universal Host Controller Interface driver
[    2.944960] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.944970] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.944979] uhci_hcd 0000:00:1a.0: detected 2 ports
[    2.945009] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000050c0
[    2.945068] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.945071] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.945074] usb usb3: Product: UHCI Host Controller
[    2.945076] usb usb3: Manufacturer: Linux 4.4.0-21-generic uhci_hcd
[    2.945078] usb usb3: SerialNumber: 0000:00:1a.0
[    2.945254] hub 3-0:1.0: USB hub found
[    2.945263] hub 3-0:1.0: 2 ports detected
[    2.945568] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.945581] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    2.945590] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.945613] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[    2.945668] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.945671] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.945673] usb usb4: Product: UHCI Host Controller
[    2.945675] usb usb4: Manufacturer: Linux 4.4.0-21-generic uhci_hcd
[    2.945678] usb usb4: SerialNumber: 0000:00:1d.0
[    2.945843] hub 4-0:1.0: USB hub found
[    2.945851] hub 4-0:1.0: 2 ports detected
[    2.946147] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.946155] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    2.946164] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.946194] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[    2.946251] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.946253] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.946256] usb usb5: Product: UHCI Host Controller
[    2.946258] usb usb5: Manufacturer: Linux 4.4.0-21-generic uhci_hcd
[    2.946260] usb usb5: SerialNumber: 0000:00:1d.1
[    2.946424] hub 5-0:1.0: USB hub found
[    2.946433] hub 5-0:1.0: 2 ports detected
[    2.946729] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.946737] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    2.946746] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.946769] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00005060
[    2.946828] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.946831] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.946833] usb usb6: Product: UHCI Host Controller
[    2.946835] usb usb6: Manufacturer: Linux 4.4.0-21-generic uhci_hcd
[    2.946838] usb usb6: SerialNumber: 0000:00:1d.2
[    2.947010] hub 6-0:1.0: USB hub found
[    2.947019] hub 6-0:1.0: 2 ports detected
[    2.947318] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.947326] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[    2.947335] uhci_hcd 0000:00:1d.3: detected 2 ports
[    2.947366] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
[    2.947426] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.947429] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.947431] usb usb7: Product: UHCI Host Controller
[    2.947434] usb usb7: Manufacturer: Linux 4.4.0-21-generic uhci_hcd
[    2.947436] usb usb7: SerialNumber: 0000:00:1d.3
[    2.947608] hub 7-0:1.0: USB hub found
[    2.947617] hub 7-0:1.0: 2 ports detected
[    2.947837] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    2.971110] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.971117] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.971340] mousedev: PS/2 mouse device common for all mice
[    2.972875] rtc_cmos 00:01: RTC can wake from S4
[    2.973046] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.973078] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.973089] i2c /dev entries driver
[    2.973175] device-mapper: uevent: version 1.0.3
[    2.973285] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.973307] ledtrig-cpu: registered to indicate activity on CPUs
[    2.973829] NET: Registered protocol family 10
[    2.974072] NET: Registered protocol family 17
[    2.974088] Key type dns_resolver registered
[    2.974352] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[    2.974359] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
[    2.974418] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.974653] registered taskstats version 1
[    2.974672] Loading compiled-in X.509 certificates
[    2.975876] Loaded X.509 cert 'Build time autogenerated kernel key: fc7c0e9f152f32eca50ea2d9722926e5127af244'
[    2.975899] zswap: loaded using pool lzo/zbud
[    2.978423] Key type trusted registered
[    2.982962] Key type encrypted registered
[    2.982974] AppArmor: AppArmor sha1 policy hashing enabled
[    2.982979] ima: No TPM chip found, activating TPM-bypass!
[    2.983010] evm: HMAC attrs: 0x1
[    2.983430]   Magic number: 12:910:597
[    2.983586] rtc_cmos 00:01: setting system clock to 2016-04-25 19:35:42 UTC (1461612942)
[    2.983993] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.983996] EDD information not available.
[    2.984144] PM: Hibernation image not present or could not be loaded.
[    2.986108] Freeing unused kernel memory: 1476K (ffffffff81f41000 - ffffffff820b2000)
[    2.986113] Write protecting the kernel read-only data: 14336k
[    2.987475] Freeing unused kernel memory: 1872K (ffff88000182c000 - ffff880001a00000)
[    2.988218] Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000)
[    2.997361] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.006600] random: systemd-udevd urandom read with 7 bits of entropy available
[    3.061926] wmi: Mapper loaded
[    3.070573] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    3.101653] ahci 0000:00:1f.2: version 3.0
[    3.101961] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    3.102000] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    3.102005] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems sxs 
[    3.105459] [drm] Initialized drm 1.1.0 20060810
[    3.112568] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
[    3.116339] scsi host0: ahci
[    3.122054] scsi host1: ahci
[    3.144077] scsi host2: ahci
[    3.149934] scsi host3: ahci
[    3.150049] ata1: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704100 irq 27
[    3.150054] ata2: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704180 irq 27
[    3.150056] ata3: DUMMY
[    3.150058] ata4: DUMMY
[    3.153607] [drm] Memory usable by graphics device = 2048M
[    3.153614] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    3.153616] fb: switching to inteldrmfb from VESA VGA
[    3.153668] Console: switching to colour dummy device 80x25
[    3.153791] [drm] Replacing VGA console driver
[    3.163205] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.163208] [drm] Driver supports precise vblank timestamp query.
[    3.163947] [drm] applying inverted panel brightness quirk
[    3.163971] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.165671] atl1c 0000:05:00.0 enp5s0: renamed from eth0
[    3.241877] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[    3.257626] fbcon: inteldrmfb (fb0) is primary device
[    3.257717] Console: switching to colour frame buffer device 170x48
[    3.257752] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.312055] usb 2-4: new high-speed USB device number 3 using ehci-pci
[    3.392070] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    3.483773] usb 2-4: New USB device found, idVendor=064e, idProduct=a103
[    3.483777] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    3.483780] usb 2-4: Product: Video WebCam
[    3.483782] usb 2-4: Manufacturer: SuYin
[    3.483784] usb 2-4: SerialNumber: CN0314-SN30-OV035-VA-R05.00.00
[    3.552117] acpi device:06: registered as cooling_device2
[    3.552236] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    3.552899] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    3.566670] usb 4-1: New USB device found, idVendor=093a, idProduct=2510
[    3.566675] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.566677] usb 4-1: Product: USB Optical Mouse
[    3.566679] usb 4-1: Manufacturer: PixArt
[    3.573966] hidraw: raw HID events driver (C) Jiri Kosina
[    3.589934] usbcore: registered new interface driver usbhid
[    3.589938] usbhid: USB HID core driver
[    3.592322] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/0003:093A:2510.0001/input/input8
[    3.592474] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[    3.640046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.641594] ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC60F, max UDMA/133
[    3.641597] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.642820] ata1.00: configured for UDMA/133
[    3.643067] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54503 C60F PQ: 0 ANSI: 5
[    3.643469] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.643531] sd 0:0:0:0: [sda] Write Protect is off
[    3.643536] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.643570] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.643577] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.709945]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.710491] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.136077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.140174] ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, AP04, max UDMA/133
[    4.145057] ata2.00: configured for UDMA/133
[    4.150604] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU10N     AP04 PQ: 0 ANSI: 5
[    4.167170] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.167174] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.167377] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.167498] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.507465] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[    5.548592] random: nonblocking pool is initialized
[    5.569489] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.696806] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    6.696971] systemd[1]: Detected architecture x86-64.
[    6.707608] systemd[1]: Set hostname to <giorgio-Aspire-5732Z>.
[    8.309289] systemd[1]: Created slice System Slice.
[    8.309369] systemd[1]: Reached target Encrypted Volumes.
[    8.309423] systemd[1]: Listening on udev Kernel Socket.
[    8.309464] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.309509] systemd[1]: Listening on Syslog Socket.
[    8.309529] systemd[1]: Reached target Remote File Systems (Pre).
[    8.309546] systemd[1]: Reached target Remote File Systems.
[    8.309704] systemd[1]: Created slice system-getty.slice.
[    8.309770] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.309871] systemd[1]: Listening on Journal Audit Socket.
[    8.310058] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.310129] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.310270] systemd[1]: Created slice User and Session Slice.
[    8.310290] systemd[1]: Reached target Slices.
[    8.310347] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.310402] systemd[1]: Listening on udev Control Socket.
[    8.310464] systemd[1]: Listening on Journal Socket.
[    8.320174] systemd[1]: Starting Nameserver information manager...
[    8.321101] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.321966] systemd[1]: Mounting Huge Pages File System...
[    8.322893] systemd[1]: Starting Braille Device Support...
[    8.564240] systemd[1]: Starting Load Kernel Modules...
[    8.565207] systemd[1]: Mounting POSIX Message Queue File System...
[    8.566265] systemd[1]: Started Read required files in advance.
[    8.569459] systemd[1]: Starting Uncomplicated firewall...
[    8.570450] systemd[1]: Mounting Debug File System...
[    8.571520] systemd[1]: Starting Journal Service...
[    8.571597] systemd[1]: Reached target User and Group Name Lookups.
[    8.574218] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.616300] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.917089] systemd[1]: Mounted Huge Pages File System.
[    8.917155] systemd[1]: Mounted POSIX Message Queue File System.
[    8.917182] systemd[1]: Mounted Debug File System.
[    9.065728] systemd[1]: Started Uncomplicated firewall.
[    9.124300] systemd[1]: Started Nameserver information manager.
[    9.458319] systemd[1]: Started Journal Service.
[    9.707163] lp: driver loaded but no devices found
[    9.790900] ppdev: user-space parallel port driver
[   12.275646] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   12.724773] systemd-journald[225]: Received request to flush runtime journal from PID 1
[   13.863039] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.062058] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20150930/utaddress-254)
[   14.062068] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.062073] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20150930/utaddress-254)
[   14.062078] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.062080] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20150930/utaddress-254)
[   14.062084] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.062086] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.185407] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   15.185413] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.185416] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   15.185418] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   15.185420] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   15.185423] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   15.192903] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   15.193002] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.744525] acer_wmi: Acer Laptop ACPI-WMI Extras
[   15.745281] acer_wmi: Function bitmap for Communication Device: 0x1
[   15.745608] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
[   16.245620] media: Linux media interface: v0.10
[   16.367731] Linux video capture interface: v2.00
[   16.581171] wl: module license 'MIXED/Proprietary' taints kernel.
[   16.581176] Disabling lock debugging due to kernel taint
[   16.588657] wl: module verification failed: signature and/or required key missing - tainting kernel
[   16.674697] wlan0: Broadcom BCM4357 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
[   16.727168] wl 0000:04:00.0 wlp4s0: renamed from wlan0
[   17.089015] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
[   17.105756] input: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input12
[   17.105857] usbcore: registered new interface driver uvcvideo
[   17.105859] USB Video Class driver (1.1.1)
[   18.140947] cfg80211: World regulatory domain updated:
[   18.140954] cfg80211:  DFS Master region: unset
[   18.140957] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   18.140960] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   18.140963] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   18.140965] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   18.140968] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   18.140971] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   18.140973] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   18.140975] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   18.140977] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   18.421502] Adding 4121596k swap on /dev/sda6.  Priority:-1 extents:1 across:4121596k FS
[   19.788089] audit: type=1400 audit(1461612959.304:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=611 comm="apparmor_parser"
[   19.788102] audit: type=1400 audit(1461612959.304:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=611 comm="apparmor_parser"
[   19.788109] audit: type=1400 audit(1461612959.304:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=611 comm="apparmor_parser"
[   19.788117] audit: type=1400 audit(1461612959.304:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=611 comm="apparmor_parser"
[   19.890168] audit: type=1400 audit(1461612959.404:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=613 comm="apparmor_parser"
[   19.965397] audit: type=1400 audit(1461612959.480:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=610 comm="apparmor_parser"
[   19.965410] audit: type=1400 audit(1461612959.480:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=610 comm="apparmor_parser"
[   20.017406] audit: type=1400 audit(1461612959.532:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=614 comm="apparmor_parser"
[   20.172382] audit: type=1400 audit(1461612959.688:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=616 comm="apparmor_parser"
[   20.179097] audit: type=1400 audit(1461612959.692:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=615 comm="apparmor_parser"
[   31.606518] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[   31.621148] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[   31.659900] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   37.310225] Non-volatile memory driver v1.3
[   38.536214] cfg80211: Regulatory domain changed to country: US
[   38.536219] cfg80211:  DFS Master region: FCC
[   38.536221] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   38.536224] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   38.536227] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[   38.536230] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   38.536232] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[   38.536234] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   38.536237] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   87.920037] usb 1-1: new high-speed USB device number 2 using ehci-pci
[   88.054886] usb 1-1: New USB device found, idVendor=1bbb, idProduct=f000
[   88.054890] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[   88.054893] usb 1-1: Product: HSPA Data Card
[   88.054895] usb 1-1: Manufacturer: USBModem
[   88.054897] usb 1-1: SerialNumber: 1234567890ABCDEF
[   89.969651] usb-storage 1-1:1.0: USB Mass Storage device detected
[   89.969793] scsi host4: usb-storage 1-1:1.0
[   89.969917] usbcore: registered new interface driver usb-storage
[   89.983693] usbcore: registered new interface driver uas
[   90.607010] usb 1-1: USB disconnect, device number 2
[   90.972035] usb 1-1: new high-speed USB device number 3 using ehci-pci
[   91.108874] usb 1-1: New USB device found, idVendor=1bbb, idProduct=0017
[   91.108878] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[   91.108881] usb 1-1: Product: HSPA Data Card
[   91.108883] usb 1-1: Manufacturer: USBModem
[   91.108885] usb 1-1: SerialNumber: 1234567890ABCDEF
[   92.403177] usb-storage 1-1:1.4: USB Mass Storage device detected
[   92.403393] scsi host5: usb-storage 1-1:1.4
[   92.961754] usbcore: registered new interface driver usbserial
[   92.961774] usbcore: registered new interface driver usbserial_generic
[   92.961790] usbserial: USB Serial support registered for generic
[   92.975198] usbcore: registered new interface driver option
[   92.975223] usbserial: USB Serial support registered for GSM modem (1-port)
[   92.975373] option 1-1:1.0: GSM modem (1-port) converter detected
[   92.976548] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[   92.976725] option 1-1:1.1: GSM modem (1-port) converter detected
[   92.977604] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[   92.977743] option 1-1:1.2: GSM modem (1-port) converter detected
[   92.979806] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[   92.979997] option 1-1:1.3: GSM modem (1-port) converter detected
[   92.981463] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB3
[   92.981603] option 1-1:1.5: GSM modem (1-port) converter detected
[   92.981801] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB4
[   93.402359] scsi 5:0:0:0: Direct-Access     ALCATEL  Mass Storage     2.31 PQ: 0 ANSI: 2
[   93.406032] sd 5:0:0:0: Attached scsi generic sg2 type 0
[   93.409356] sd 5:0:0:0: [sdb] Attached SCSI removable disk
giorgio@giorgio-Aspire-5732Z:~$