[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-39-generic (buildd@phianna) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #53-Ubuntu SMP Tue May 26 09:38:21 UTC 2015 (Ubuntu 3.16.0-39.53-generic 3.16.7-ckt11)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-39-generic root=UUID=c61cb97e-3e10-433f-a035-80d63600dc53 ro rootflags=sync quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007c63efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c63f000-0x000000007c6befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c6bf000-0x000000007c7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007c7bf000-0x000000007c7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007c7ff000-0x000000007c7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c800000-0x000000007f1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20079                           /Base Board Product Name, BIOS 40CN25WW(V2.11) 07/29/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-protect
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07C800000 mask FFF800000 uncachable
[    0.000000]   2 base 07D000000 mask FFF000000 uncachable
[    0.000000]   3 base 07E000000 mask FFE000000 uncachable
[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   5 base 100000000 mask FFF800000 write-back
[    0.000000]   6 base 100600000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x7c800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff]
[    0.000000]  [mem 0x100400000-0x1005fffff] page 2M
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff]
[    0.000000]  [mem 0x100000000-0x1003fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0x7c63efff]
[    0.000000]  [mem 0x40200000-0x7c5fffff] page 2M
[    0.000000]  [mem 0x7c600000-0x7c63efff] page 4k
[    0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[    0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7c7ff000-0x7c7fffff]
[    0.000000]  [mem 0x7c7ff000-0x7c7fffff] page 4k
[    0.000000] RAMDISK: [mem 0x35900000-0x36c77fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000007C7FE120 00008C (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000007C7FB000 0000F4 (v04 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000007C7EE000 00938E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000007C76E000 000040
[    0.000000] ACPI: SLIC 0x000000007C7FD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000007C7FC000 0000A5 (v32 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000007C7FA000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000007C7F9000 00008C (v02 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000007C7F8000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x000000007C7ED000 000224 (v01 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007C7EC000 0006FE (v01 INSYDE HR CRB   00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000007C7EA000 000028 (v01 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000007C7E7000 000034 (v07 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007C7E6000 00090C (v01 INSYDE HR CRB   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007C7E5000 000996 (v01 INSYDE HR CRB   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007C7E3000 0016E0 (v01 INSYDE HR CRB   00001000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1005fffff]
[    0.000000]   NODE_DATA [mem 0x1005fb000-0x1005fffff]
[    0.000000]  [ffffea0000000000-ffffea00041fffff] PMD -> [ffff88007a000000-ffff88007c1fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1005fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0x7c63efff]
[    0.000000]   node   0: [mem 0x7c7ff000-0x7c7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x1005fffff]
[    0.000000] On node 0 totalpages: 509916
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7881 pages used for memmap
[    0.000000]   DMA32 zone: 504384 pages, LIFO batch:31
[    0.000000]   Normal zone: 24 pages used for memmap
[    0.000000]   Normal zone: 1536 pages, LIFO batch:0
[    0.000000] Reserving Intel graphics stolen memory at 0x7d200000-0x7f1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c63f000-0x7c6befff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c6bf000-0x7c7befff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c7bf000-0x7c7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c800000-0x7f1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0x7f200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880100200000 s82432 r8192 d24064 u262144
[    0.000000] pcpu-alloc: s82432 r8192 d24064 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 501791
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-39-generic root=UUID=c61cb97e-3e10-433f-a035-80d63600dc53 ro rootflags=sync quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1900844K/2039664K available (7754K kernel code, 1197K rwdata, 3612K rodata, 1360K init, 1308K bss, 138820K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 8912896 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2195.159 MHz processor
[    0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.31 BogoMIPS (lpj=8780636)
[    0.000042] pid_max: default: 32768 minimum: 301
[    0.000050] ACPI: Core revision 20140424
[    0.008918] ACPI: All ACPI Tables successfully acquired
[    0.021678] Security Framework initialized
[    0.021700] AppArmor: AppArmor initialized
[    0.021701] Yama: becoming mindful.
[    0.021906] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.022469] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.022698] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.022701] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.022935] Initializing cgroup subsys memory
[    0.022961] Initializing cgroup subsys devices
[    0.022969] Initializing cgroup subsys freezer
[    0.022972] Initializing cgroup subsys net_cls
[    0.022976] Initializing cgroup subsys blkio
[    0.022980] Initializing cgroup subsys perf_event
[    0.022982] Initializing cgroup subsys net_prio
[    0.022989] Initializing cgroup subsys hugetlb
[    0.023015] CPU: Physical Processor ID: 0
[    0.023016] CPU: Processor Core ID: 0
[    0.023021] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.023024] mce: CPU supports 7 MCE banks
[    0.023033] CPU0: Thermal monitoring handled by SMI
[    0.023040] process: using mwait in idle threads
[    0.023044] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[    0.023181] Freeing SMP alternatives memory: 32K (ffffffff81e81000 - ffffffff81e89000)
[    0.024670] ftrace: allocating 29350 entries in 115 pages
[    0.040870] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080516] smpboot: CPU0: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (fam: 06, model: 2a, stepping: 07)
[    0.080525] TSC deadline timer enabled
[    0.080554] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.080576] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.080578] ... version:                3
[    0.080579] ... bit width:              48
[    0.080580] ... generic registers:      4
[    0.080581] ... value mask:             0000ffffffffffff
[    0.080583] ... max period:             0000ffffffffffff
[    0.080584] ... fixed-purpose events:   3
[    0.080585] ... event mask:             000000070000000f
[    0.082592] x86: Booting SMP configuration:
[    0.082595] .... node  #0, CPUs:      #1
[    0.093537] CPU1: Thermal monitoring handled by SMI
[    0.095708] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.095804]  #2
[    0.106744] CPU2: Thermal monitoring handled by SMI
[    0.108925]  #3
[    0.119963] CPU3: Thermal monitoring handled by SMI
[    0.122067] x86: Booted up 1 node, 4 CPUs
[    0.122072] smpboot: Total of 4 processors activated (17561.27 BogoMIPS)
[    0.125624] devtmpfs: initialized
[    0.129045] evm: security.selinux
[    0.129047] evm: security.SMACK64
[    0.129048] evm: security.SMACK64EXEC
[    0.129049] evm: security.SMACK64TRANSMUTE
[    0.129050] evm: security.SMACK64MMAP
[    0.129051] evm: security.ima
[    0.129052] evm: security.capability
[    0.129112] PM: Registering ACPI NVS region [mem 0x7c6bf000-0x7c7befff] (1048576 bytes)
[    0.130068] pinctrl core: initialized pinctrl subsystem
[    0.130146] regulator-dummy: no parameters
[    0.130182] RTC time:  0:48:14, date: 06/13/15
[    0.130232] NET: Registered protocol family 16
[    0.130404] cpuidle: using governor ladder
[    0.130407] cpuidle: using governor menu
[    0.130465] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.130467] ACPI: bus type PCI registered
[    0.130469] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.130552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.130555] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.130653] PCI: Using configuration type 1 for base access
[    0.130823] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.130824] mtrr: probably your BIOS does not setup all CPUs.
[    0.130825] mtrr: corrected configuration.
[    0.134618] ACPI: Added _OSI(Module Device)
[    0.134621] ACPI: Added _OSI(Processor Device)
[    0.134623] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.134624] ACPI: Added _OSI(Processor Aggregator Device)
[    0.137522] ACPI: Executed 1 blocks of module-level executable AML code
[    0.146110] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.147120] ACPI: Dynamic OEM Table Load:
[    0.147130] ACPI: SSDT 0xFFFF8800753E8800 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.150343] ACPI: Dynamic OEM Table Load:
[    0.150350] ACPI: SSDT 0xFFFF8800751C9000 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.154200] ACPI: Dynamic OEM Table Load:
[    0.154206] ACPI: SSDT 0xFFFF880074CE8000 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.162927] ACPI: Interpreter enabled
[    0.162934] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.162940] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.162955] ACPI: (supports S0 S3 S4 S5)
[    0.162957] ACPI: Using IOAPIC for interrupt routing
[    0.162984] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.315537] ACPI: Power Resource [FN00] (off)
[    0.315625] ACPI: Power Resource [FN01] (off)
[    0.316203] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.316209] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.316241] \_SB_.PCI0:_OSC invalid UUID
[    0.316242] _OSC request data:1 1f 0 
[    0.316246] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.316861] PCI host bridge to bus 0000:00
[    0.316864] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.316866] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.316868] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.316869] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.316871] pci_bus 0000:00: root bus resource [mem 0x7f200000-0xfeafffff]
[    0.316879] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.316969] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.317004] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.317041] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.317087] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.317098] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa03fffff 64bit]
[    0.317104] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.317109] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.317214] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.317239] pci 0000:00:16.0: reg 0x10: [mem 0xa1604000-0xa160400f 64bit]
[    0.317318] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.317409] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.317698] pci 0000:00:1a.0: reg 0x10: [mem 0xa160a000-0xa160a3ff]
[    0.319329] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.319730] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.319807] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.319826] pci 0000:00:1b.0: reg 0x10: [mem 0xa1600000-0xa1603fff 64bit]
[    0.319904] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.319944] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.319987] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.320073] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.320117] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.320159] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.320244] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.320286] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.320340] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.320617] pci 0000:00:1d.0: reg 0x10: [mem 0xa1609000-0xa16093ff]
[    0.322247] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.322700] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.322838] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.323058] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.323078] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.323086] pci 0000:00:1f.2: reg 0x14: [io  0x409c-0x409f]
[    0.323095] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.323104] pci 0000:00:1f.2: reg 0x1c: [io  0x4098-0x409b]
[    0.323112] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.323121] pci 0000:00:1f.2: reg 0x24: [mem 0xa1608000-0xa16087ff]
[    0.323169] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323242] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.323259] pci 0000:00:1f.3: reg 0x10: [mem 0xa1606000-0xa16060ff 64bit]
[    0.323281] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.323420] pci 0000:01:00.0: [1002:68e4] type 00 class 0x030000
[    0.323435] pci 0000:01:00.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.323446] pci 0000:01:00.0: reg 0x18: [mem 0xa0600000-0xa061ffff 64bit]
[    0.323452] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.323464] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.323503] pci 0000:01:00.0: supports D1 D2
[    0.323541] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.330228] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.330237] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.330244] pci 0000:00:01.0:   bridge window [mem 0xa0600000-0xa15fffff]
[    0.330253] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x8fffffff 64bit pref]
[    0.330459] pci 0000:07:00.0: [1969:2062] type 00 class 0x020000
[    0.330562] pci 0000:07:00.0: reg 0x10: [mem 0xa0500000-0xa053ffff 64bit]
[    0.330611] pci 0000:07:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.331074] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.331169] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.338260] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.338270] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.338280] pci 0000:00:1c.0:   bridge window [mem 0xa0500000-0xa05fffff]
[    0.338421] pci 0000:08:00.0: [168c:002b] type 00 class 0x028000
[    0.338475] pci 0000:08:00.0: reg 0x10: [mem 0xa0400000-0xa040ffff 64bit]
[    0.338746] pci 0000:08:00.0: supports D1
[    0.338747] pci 0000:08:00.0: PME# supported from D0 D1 D3hot
[    0.338803] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.346238] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.346253] pci 0000:00:1c.1:   bridge window [mem 0xa0400000-0xa04fffff]
[    0.418696] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[    0.418749] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.418799] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.418849] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.418898] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.418948] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.418999] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.419050] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.419202] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.419712] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.419827] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.419830] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.419836] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.419838] vgaarb: loaded
[    0.419839] vgaarb: bridge control possible 0000:01:00.0
[    0.419840] vgaarb: no bridge control possible 0000:00:02.0
[    0.420110] SCSI subsystem initialized
[    0.420160] libata version 3.00 loaded.
[    0.420184] ACPI: bus type USB registered
[    0.420202] usbcore: registered new interface driver usbfs
[    0.420213] usbcore: registered new interface driver hub
[    0.420237] usbcore: registered new device driver usb
[    0.420382] PCI: Using ACPI for IRQ routing
[    0.421982] PCI: pci_cache_line_size set to 64 bytes
[    0.422047] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.422049] e820: reserve RAM buffer [mem 0x7c63f000-0x7fffffff]
[    0.422051] e820: reserve RAM buffer [mem 0x7c800000-0x7fffffff]
[    0.422052] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
[    0.422166] NetLabel: Initializing
[    0.422167] NetLabel:  domain hash size = 128
[    0.422168] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.422182] NetLabel:  unlabeled traffic allowed by default
[    0.422259] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.422265] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.424301] Switched to clocksource hpet
[    0.430301] AppArmor: AppArmor Filesystem Enabled
[    0.430341] pnp: PnP ACPI init
[    0.430358] ACPI: bus type PNP registered
[    0.430497] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.430500] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.430502] system 00:00: [io  0x1010-0x1013] has been reserved
[    0.430504] system 00:00: [io  0xffff] has been reserved
[    0.430506] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.430508] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.430510] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.430512] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.430516] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.430550] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.430597] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.430600] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.500427] pnp 00:03: Plug and Play ACPI device, IDs SYN0730 SYN0700 SYN0002 PNP0f13 (active)
[    0.500617] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.500744] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.500747] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.500749] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.500751] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.500753] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.500755] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.500757] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.500759] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.500762] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.500764] system 00:05: [mem 0x7f200000-0x7f200fff] has been reserved
[    0.500766] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.501002] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.501004] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[    0.501007] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.501025] pnp: PnP ACPI: found 7 devices
[    0.501026] ACPI: bus type PNP unregistered
[    0.507545] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.507574] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0620000-0xa063ffff pref]
[    0.507577] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.507579] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.507583] pci 0000:00:01.0:   bridge window [mem 0xa0600000-0xa15fffff]
[    0.507586] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x8fffffff 64bit pref]
[    0.507589] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.507593] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.507598] pci 0000:00:1c.0:   bridge window [mem 0xa0500000-0xa05fffff]
[    0.507607] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.507613] pci 0000:00:1c.1:   bridge window [mem 0xa0400000-0xa04fffff]
[    0.507622] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.507624] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.507626] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.507628] pci_bus 0000:00: resource 7 [mem 0x7f200000-0xfeafffff]
[    0.507630] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.507632] pci_bus 0000:01: resource 1 [mem 0xa0600000-0xa15fffff]
[    0.507634] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
[    0.507636] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.507637] pci_bus 0000:07: resource 1 [mem 0xa0500000-0xa05fffff]
[    0.507640] pci_bus 0000:08: resource 1 [mem 0xa0400000-0xa04fffff]
[    0.507668] NET: Registered protocol family 2
[    0.507868] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.507917] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.507973] TCP: Hash tables configured (established 16384 bind 16384)
[    0.507994] TCP: reno registered
[    0.508000] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.508011] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.508062] NET: Registered protocol family 1
[    0.508079] pci 0000:00:02.0: Video device with shadowed ROM
[    0.540351] PCI: CLS 64 bytes, default 64
[    0.540408] Trying to unpack rootfs image as initramfs...
[    0.886982] Freeing initrd memory: 19936K (ffff880035900000 - ffff880036c78000)
[    0.886995] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.886997] software IO TLB [mem 0x76000000-0x7a000000] (64MB) mapped at [ffff880076000000-ffff880079ffffff]
[    0.887059] Simple Boot Flag at 0x44 set to 0x1
[    0.887261] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.887299] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x17
[    0.887307] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x17
[    0.887317] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x17
[    0.887324] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x17
[    0.887390] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.887415] Scanning for low memory corruption every 60 seconds
[    0.887839] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.887879] Initialise system trusted keyring
[    0.887898] audit: initializing netlink subsys (disabled)
[    0.887913] audit: type=2000 audit(1434156494.880:1): initialized
[    0.888261] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.889912] zpool: loaded
[    0.889914] zbud: loaded
[    0.890088] VFS: Disk quotas dquot_6.5.2
[    0.890129] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.890633] fuse init (API version 7.23)
[    0.890725] msgmni has been set to 3751
[    0.890795] Key type big_key registered
[    0.891158] Key type asymmetric registered
[    0.891161] Asymmetric key parser 'x509' registered
[    0.891199] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.891246] io scheduler noop registered
[    0.891249] io scheduler deadline registered (default)
[    0.891303] io scheduler cfq registered
[    0.891504] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.891817] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.891835] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.891894] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.891895] vesafb: scrolling: redraw
[    0.891897] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.894204] vesafb: framebuffer at 0x90000000, mapped to 0xffffc90004400000, using 3072k, total 3072k
[    0.894311] Console: switching to colour frame buffer device 128x48
[    0.894326] fb0: VESA VGA frame buffer device
[    0.894361] intel_idle: MWAIT substates: 0x21120
[    0.894362] intel_idle: v0.4 model 0x2A
[    0.894364] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.895048] ACPI: AC Adapter [ACAD] (on-line)
[    0.895134] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    0.895138] ACPI: Power Button [PWRB]
[    0.895328] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1
[    0.895330] ACPI: Sleep Button [SLPB]
[    0.895517] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.895608] ACPI: Lid Switch [LID0]
[    0.895649] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.895651] ACPI: Power Button [PWRF]
[    0.895709] ACPI: Fan [FAN0] (off)
[    0.895739] ACPI: Fan [FAN1] (off)
[    0.898583] thermal LNXTHERM:00: registered as thermal_zone0
[    0.898585] ACPI: Thermal Zone [TZ00] (0 C)
[    0.898618] GHES: HEST is not enabled!
[    0.898724] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.148589] ACPI: Battery Slot [BAT1] (battery present)
[    1.148765] Linux agpgart interface v0.103
[    1.150248] brd: module loaded
[    1.150953] loop: module loaded
[    1.151180] libphy: Fixed MDIO Bus: probed
[    1.151183] tun: Universal TUN/TAP device driver, 1.6
[    1.151184] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.151281] PPP generic driver version 2.4.2
[    1.151334] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.151340] ehci-pci: EHCI PCI platform driver
[    1.151466] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.151473] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.151487] ehci-pci 0000:00:1a.0: debug port 2
[    1.155408] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.155426] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa160a000
[    1.163516] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.163577] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.163579] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.163581] usb usb1: Product: EHCI Host Controller
[    1.163583] usb usb1: Manufacturer: Linux 3.16.0-39-generic ehci_hcd
[    1.163584] usb usb1: SerialNumber: 0000:00:1a.0
[    1.163720] hub 1-0:1.0: USB hub found
[    1.163727] hub 1-0:1.0: 2 ports detected
[    1.163938] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.163944] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.163956] ehci-pci 0000:00:1d.0: debug port 2
[    1.167846] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.167861] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa1609000
[    1.179592] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.179692] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.179695] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.179697] usb usb2: Product: EHCI Host Controller
[    1.179699] usb usb2: Manufacturer: Linux 3.16.0-39-generic ehci_hcd
[    1.179701] usb usb2: SerialNumber: 0000:00:1d.0
[    1.179930] hub 2-0:1.0: USB hub found
[    1.179938] hub 2-0:1.0: 2 ports detected
[    1.180060] ehci-platform: EHCI generic platform driver
[    1.180074] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.180080] ohci-pci: OHCI PCI platform driver
[    1.180093] ohci-platform: OHCI generic platform driver
[    1.180102] uhci_hcd: USB Universal Host Controller Interface driver
[    1.180170] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.222043] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.222048] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.222328] mousedev: PS/2 mouse device common for all mice
[    1.223536] rtc_cmos 00:01: RTC can wake from S4
[    1.223728] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.223761] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.223863] device-mapper: uevent: version 1.0.3
[    1.223957] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.223977] Intel P-state driver initializing.
[    1.223991] Intel pstate controlling: cpu 0
[    1.224879] Intel pstate controlling: cpu 1
[    1.224906] Intel pstate controlling: cpu 2
[    1.224926] Intel pstate controlling: cpu 3
[    1.224980] Consider also installing thermald for improved thermal control.
[    1.224999] ledtrig-cpu: registered to indicate activity on CPUs
[    1.225282] TCP: cubic registered
[    1.225599] NET: Registered protocol family 10
[    1.226180] NET: Registered protocol family 17
[    1.226220] Key type dns_resolver registered
[    1.227125] Loading compiled-in X.509 certificates
[    1.230063] Loaded X.509 cert 'Magrathea: Glacier signing key: ce65b6e2bf0328698c45ce1c1b3273b36302ed82'
[    1.230100] registered taskstats version 1
[    1.232970] Key type trusted registered
[    1.237015] Key type encrypted registered
[    1.237023] AppArmor: AppArmor sha1 policy hashing enabled
[    1.237026] ima: No TPM chip found, activating TPM-bypass!
[    1.237048] evm: HMAC attrs: 0x1
[    1.237466]   Magic number: 3:759:809
[    1.237563] rtc_cmos 00:01: setting system clock to 2015-06-13 00:48:15 UTC (1434156495)
[    1.237628] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.237629] EDD information not available.
[    1.237714] PM: Hibernation image not present or could not be loaded.
[    1.239219] Freeing unused kernel memory: 1360K (ffffffff81d2d000 - ffffffff81e81000)
[    1.239221] Write protecting the kernel read-only data: 12288k
[    1.240390] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000)
[    1.241530] Freeing unused kernel memory: 484K (ffff880001b87000 - ffff880001c00000)
[    1.252541] systemd-udevd[123]: starting version 208
[    1.253155] random: systemd-udevd urandom read with 11 bits of entropy available
[    1.273186] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.282179] ahci 0000:00:1f.2: version 3.0
[    1.282348] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.282380] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.295385] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.295392] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    1.304383] scsi0 : ahci
[    1.304536] scsi1 : ahci
[    1.304985] scsi2 : ahci
[    1.305360] scsi3 : ahci
[    1.306706] scsi4 : ahci
[    1.306842] scsi5 : ahci
[    1.306924] ata1: SATA max UDMA/133 abar m2048@0xa1608000 port 0xa1608100 irq 41
[    1.306928] ata2: DUMMY
[    1.306932] ata3: SATA max UDMA/133 abar m2048@0xa1608000 port 0xa1608200 irq 41
[    1.306934] ata4: DUMMY
[    1.306936] ata5: DUMMY
[    1.306937] ata6: DUMMY
[    1.309241] atl1c 0000:07:00.0: version 1.0.1.1-NAPI
[    1.475345] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.607895] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.607899] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.608315] hub 1-1:1.0: USB hub found
[    1.608601] hub 1-1:1.0: 6 ports detected
[    1.623101] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.626148] ata1.00: ATA-8: WDC WD5000BPVT-24HXZT3, 03.01A03, max UDMA/133
[    1.626159] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.629290] ata1.00: configured for UDMA/133
[    1.629548] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BPVT-2 1A03 PQ: 0 ANSI: 5
[    1.630008] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.630013] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.630023] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.630115] sd 0:0:0:0: [sda] Write Protect is off
[    1.630119] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.630159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.705033]  sda: sda1 sda2 < sda5 >
[    1.705464] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.718910] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.851283] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.851299] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.851643] hub 2-1:1.0: USB hub found
[    1.851708] hub 2-1:1.0: 6 ports detected
[    1.882826] tsc: Refined TSC clocksource calibration: 2195.014 MHz
[    1.922956] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    1.946762] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.948710] ata3.00: ATAPI: Optiarc DVD RW AD-7710H, A833, max UDMA/100
[    1.950774] ata3.00: configured for UDMA/100
[    1.952967] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7710H  A833 PQ: 0 ANSI: 5
[    1.968912] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.968921] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.969111] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.969200] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.015407] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0139
[    2.015417] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.015423] usb 1-1.4: Product: USB2.0-CRW
[    2.015427] usb 1-1.4: Manufacturer: Generic
[    2.015432] usb 1-1.4: SerialNumber: 20100201396000000
[    2.019989] usbcore: registered new interface driver rtsx_usb
[    2.086776] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[    2.182710] usb 1-1.6: New USB device found, idVendor=0489, idProduct=e00d
[    2.182714] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.182716] usb 1-1.6: Product: Broadcom Bluetooth 2.1 Device
[    2.182718] usb 1-1.6: Manufacturer: Broadcom Corp
[    2.182719] usb 1-1.6: SerialNumber: 3859F9D44465
[    2.254592] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    2.332185] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    2.346879] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.352530] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0745
[    2.352536] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.352540] usb 2-1.1: Product: Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0
[    2.352543] usb 2-1.1: Manufacturer: Microsoft
[    2.422383] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[    2.529526] usb 2-1.6: New USB device found, idVendor=04f2, idProduct=b272
[    2.529531] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.529534] usb 2-1.6: Product: Lenovo EasyCamera
[    2.529536] usb 2-1.6: Manufacturer: Chicony Corp.
[    2.881856] Switched to clocksource tsc
[    3.210114] random: nonblocking pool is initialized
[   13.694375] Adding 2037756k swap on /dev/sda5.  Priority:-1 extents:1 across:2037756k FS
[   13.788178] systemd-udevd[325]: starting version 208
[   13.924497] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input7
[   13.934996] lp: driver loaded but no devices found
[   13.939018] ppdev: user-space parallel port driver
[   14.015014] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.020323] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   14.033867] [drm] Initialized drm 1.1.0 20060810
[   14.040627] cfg80211: Calling CRDA to update world regulatory domain
[   14.040775] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[   14.040787] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.040792] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[   14.040799] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[   14.040803] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.040805] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[   14.040809] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[   14.040814] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.040816] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[   14.040821] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[   14.040826] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.040828] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.087422] Bluetooth: Core ver 2.19
[   14.087448] NET: Registered protocol family 31
[   14.087450] Bluetooth: HCI device and connection manager initialized
[   14.087459] Bluetooth: HCI socket layer initialized
[   14.087463] Bluetooth: L2CAP socket layer initialized
[   14.087474] Bluetooth: SCO socket layer initialized
[   14.105872] [drm] Memory usable by graphics device = 2048M
[   14.105879] checking generic (90000000 300000) vs hw (90000000 10000000)
[   14.105881] fb: switching to inteldrmfb from VESA VGA
[   14.105910] Console: switching to colour dummy device 80x25
[   14.106296] [drm] Replacing VGA console driver
[   14.119925] usbcore: registered new interface driver btusb
[   14.167437] audit: type=1400 audit(1434156508.438:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=406 comm="apparmor_parser"
[   14.167449] audit: type=1400 audit(1434156508.438:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=406 comm="apparmor_parser"
[   14.167457] audit: type=1400 audit(1434156508.438:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=406 comm="apparmor_parser"
[   14.170222] ath: phy0: Enable LNA combining
[   14.173399] ath: phy0: ASPM enabled: 0x43
[   14.173404] ath: EEPROM regdomain: 0x65
[   14.173405] ath: EEPROM indicates we should expect a direct regpair map
[   14.173408] ath: Country alpha2 being used: 00
[   14.173409] ath: Regpair used: 0x65
[   14.174173] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   14.174242] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.174244] [drm] Driver supports precise vblank timestamp query.
[   14.174574] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[   14.197235] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.198984] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90004800000, irq=17
[   14.199577] kvm: disabled by bios
[   14.218003] intel_rapl: Found RAPL domain package
[   14.218008] intel_rapl: Found RAPL domain core
[   14.218010] intel_rapl: Found RAPL domain uncore
[   14.221398] [drm] Wrong MCH_SSKPD value: 0x16040307
[   14.221401] [drm] This can cause pipe underruns and display issues.
[   14.221403] [drm] Please upgrade your BIOS to fix this.
[   14.235584] [drm] radeon kernel modesetting enabled.
[   14.235602] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[   14.235670] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[   14.342324] fbcon: inteldrmfb (fb0) is primary device
[   14.342394] Console: switching to colour frame buffer device 170x48
[   14.342417] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   14.342419] i915 0000:00:02.0: registered panic notifier
[   14.353498] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   14.353824] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   14.355390] acpi LNXVIDEO:02: registered as cooling_device7
[   14.355480] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input8
[   14.355631] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   14.355642] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   14.355652] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   14.355662] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   14.355671] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   14.355680] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   14.355689] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[   14.356305] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   14.357753] acpi device:34: registered as cooling_device8
[   14.357880] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:0a/input/input9
[   14.358040] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.359735] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   14.361217] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E4 0x17AA:0x397A).
[   14.361234] [drm] register mmio base: 0xA0600000
[   14.361237] [drm] register mmio size: 131072
[   14.361240] vga_switcheroo: enabled
[   14.361335] ATPX version 1, functions 0x00000183
[   14.383101] sound hdaudioC0D0: CX20590: BIOS auto-probing.
[   14.383536] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   14.383539] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.383543] sound hdaudioC0D0:    hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[   14.383546] sound hdaudioC0D0:    mono: mono_out=0x0
[   14.383549] sound hdaudioC0D0:    inputs:
[   14.383552] sound hdaudioC0D0:      Mic=0x1b
[   14.383555] sound hdaudioC0D0:      Internal Mic=0x1a
[   14.384400] sound hdaudioC0D0: Enable sync_write for stable communication
[   14.395615] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.395768] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.395913] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.420098] cfg80211: World regulatory domain updated:
[   14.420103] cfg80211:  DFS Master region: unset
[   14.420104] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   14.420107] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.420109] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.420111] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.420113] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.420115] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   15.110005] media: Linux media interface: v0.10
[   15.112844] hidraw: raw HID events driver (C) Jiri Kosina
[   15.116892] Linux video capture interface: v2.00
[   15.126955] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b272)
[   15.129390] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input13
[   15.129482] usbcore: registered new interface driver uvcvideo
[   15.129485] USB Video Class driver (1.1.1)
[   15.130763] usbcore: registered new interface driver usbhid
[   15.130768] usbhid: USB HID core driver
[   15.133740] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:0745.0001/input/input14
[   15.133873] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:1d.0-1.1/input0
[   15.134276] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:0745.0002/input/input15
[   15.135874] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:1d.0-1.1/input1
[   15.146290] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:0745.0003/input/input16
[   15.146490] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v8.0] on usb-0000:00:1d.0-1.1/input2
[   15.420658] ATOM BIOS: Lenovo
[   15.420719] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   15.420721] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   15.420723] [drm] Detected VRAM RAM=1024M, BAR=256M
[   15.420724] [drm] RAM width 64bits DDR
[   15.420790] [TTM] Zone  kernel: Available graphics memory: 961542 kiB
[   15.420792] [TTM] Initializing pool allocator
[   15.420797] [TTM] Initializing DMA pool allocator
[   15.420820] [drm] radeon: 1024M of VRAM memory ready
[   15.420822] [drm] radeon: 1024M of GTT memory ready.
[   15.420833] [drm] Loading CEDAR Microcode
[   15.540396] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   15.807816] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   15.907641] [drm] Internal thermal controller with fan control
[   15.910186] [drm] radeon: dpm initialized
[   15.970313] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   15.971644] [drm] PCIE gen 2 link speeds already enabled
[   15.974297] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[   15.974411] radeon 0000:01:00.0: WB enabled
[   15.974415] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880066449c00
[   15.974417] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880066449c0c
[   15.974911] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90004d9c418
[   15.974913] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.974914] [drm] Driver supports precise vblank timestamp query.
[   15.974915] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   15.974939] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[   15.974953] radeon 0000:01:00.0: radeon: using MSI.
[   15.974979] [drm] radeon: irq initialized.
[   15.992305] [drm] ring test on 0 succeeded in 1 usecs
[   15.992316] [drm] ring test on 3 succeeded in 3 usecs
[   16.063096] init: Error while reading from descriptor: Broken pipe
[   16.067426] init: failsafe main process (659) killed by TERM signal
[   16.188387] [drm] ring test on 5 succeeded in 2 usecs
[   16.188395] [drm] UVD initialized successfully.
[   16.188657] [drm] ib test on ring 0 succeeded in 0 usecs
[   16.188685] [drm] ib test on ring 3 succeeded in 0 usecs
[   16.230909] audit: type=1400 audit(1434156510.502:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=739 comm="apparmor_parser"
[   16.230919] audit: type=1400 audit(1434156510.502:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=739 comm="apparmor_parser"
[   16.232676] audit: type=1400 audit(1434156510.506:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=739 comm="apparmor_parser"
[   16.232683] audit: type=1400 audit(1434156510.506:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=739 comm="apparmor_parser"
[   16.232688] audit: type=1400 audit(1434156510.506:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=739 comm="apparmor_parser"
[   16.243013] audit: type=1400 audit(1434156510.518:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=739 comm="apparmor_parser"
[   16.243023] audit: type=1400 audit(1434156510.518:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=739 comm="apparmor_parser"
[   16.349290] [drm] ib test on ring 5 succeeded
[   16.349867] [drm] Radeon Display Connectors
[   16.370428] radeon 0000:01:00.0: No connectors reported connected with modes
[   16.370447] [drm] Cannot find any crtc or sizes - going 1024x768
[   16.371768] [drm] fb mappable at 0x8045E000
[   16.371770] [drm] vram apper at 0x80000000
[   16.371771] [drm] size 3145728
[   16.371772] [drm] fb depth is 24
[   16.371773] [drm]    pitch is 4096
[   16.371881] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[   16.372398] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 1
[   16.855605] init: cups main process (846) killed by HUP signal
[   16.855617] init: cups main process ended, respawning
[   17.028655] Bluetooth: RFCOMM TTY layer initialized
[   17.029200] Bluetooth: RFCOMM socket layer initialized
[   17.029209] Bluetooth: RFCOMM ver 1.11
[   17.328942] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.328948] Bluetooth: BNEP filters: protocol multicast
[   17.328957] Bluetooth: BNEP socket layer initialized
[   18.206779] systemd-logind[943]: New seat seat0.
[   18.225961] systemd-logind[943]: Watching system buttons on /dev/input/event3 (Power Button)
[   18.226027] systemd-logind[943]: Watching system buttons on /dev/input/event8 (Video Bus)
[   18.226086] systemd-logind[943]: Watching system buttons on /dev/input/event0 (Power Button)
[   18.226144] systemd-logind[943]: Watching system buttons on /dev/input/event1 (Sleep Button)
[   18.226199] systemd-logind[943]: Watching system buttons on /dev/input/event7 (Video Bus)
[   18.226254] systemd-logind[943]: Watching system buttons on /dev/input/event2 (Lid Switch)
[   18.271540] atl1c 0000:07:00.0: irq 46 for MSI/MSI-X
[   18.286965] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.319654] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.236053] wlan0: authenticate with 28:c6:8e:47:a3:d6
[   19.243110] wlan0: send auth to 28:c6:8e:47:a3:d6 (try 1/3)
[   19.246913] wlan0: authenticated
[   19.247680] wlan0: associate with 28:c6:8e:47:a3:d6 (try 1/3)
[   19.253070] wlan0: RX AssocResp from 28:c6:8e:47:a3:d6 (capab=0x431 status=0 aid=5)
[   19.253134] wlan0: associated
[   19.253159] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.253204] cfg80211: Calling CRDA for country: AU
[   19.255489] ath: EEPROM regdomain: 0x8024
[   19.255493] ath: EEPROM indicates we should expect a country code
[   19.255494] ath: doing EEPROM country->regdmn map search
[   19.255496] ath: country maps to regdmn code: 0x21
[   19.255497] ath: Country alpha2 being used: AU
[   19.255498] ath: Regpair used: 0x21
[   19.255500] ath: regdomain 0x8024 dynamically updated by country IE
[   19.255536] cfg80211: Regulatory domain changed to country: AU
[   19.255537] cfg80211:  DFS Master region: unset
[   19.255538] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   19.255540] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   19.255543] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm), (N/A)
[   19.255545] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm), (0 s)
[   19.255547] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
[   19.916494] audit_printk_skb: 51 callbacks suppressed
[   19.916498] audit: type=1400 audit(1434156514.194:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1182 comm="apparmor_parser"