Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.0-00261
S - IMAGE_VARIANT_STRING=HAAAANAAA
S - OEM_IMAGE_VERSION_STRING=C-BPATTH
S - Boot Config, 0x000002e3
S - Core 0 Frequency, 0 MHz
B -      1544 - PBL, Start
B -      3488 - bootable_media_detect_entry, Start
B -    279122 - bootable_media_detect_success, Start
B -    279127 - elf_loader_entry, Start
B -    281886 - auth_hash_seg_entry, Start
B -    282094 - auth_hash_seg_exit, Start
B -    310493 - elf_segs_hash_verify_entry, Start
B -    369369 - PBL, End
B -    375760 - SBL1, Start
B -    438590 - pm_device_init, Start
D -     14731 - pm_device_init, Delta
B -    453931 - boot_flash_init, Start
D -        30 - boot_flash_init, Delta
B -    457927 - boot_config_data_table_init, Start
D -    345229 - boot_config_data_table_init, Delta - (0 Bytes)
B -    807701 - CDT version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
B -    813923 - sbl1_ddr_set_params, Start
B -    817613 - cpr_init, Start
D -         0 - cpr_init, Delta
B -    823225 - Pre_DDR_clock_init, Start
D -       183 - Pre_DDR_clock_init, Delta
D -         0 - sbl1_ddr_set_params, Delta
B -    835730 - pm_driver_init, Start
D -      6832 - pm_driver_init, Delta
B -    851224 - clock_init, Start
D -        30 - clock_init, Delta
B -    861350 - Image Load, Start
D -     36661 - QSEE Image Loaded, Delta - (460664 Bytes)
B -    898042 - Image Load, Start
D -       671 - SEC Image Loaded, Delta - (2048 Bytes)
B -    905209 - sbl1_efs_handle_cookies, Start
D -         0 - sbl1_efs_handle_cookies, Delta
B -    913109 - Image Load, Start
D -     14457 - QHEE Image Loaded, Delta - (51952 Bytes)
B -    927596 - Image Load, Start
D -     18727 - RPM Image Loaded, Delta - (149492 Bytes)
B -    946354 - Image Load, Start
D -     23363 - APPSBL Image Loaded, Delta - (479072 Bytes)
B -    969747 - QSEE Execution, Start
D -        61 - QSEE Execution, Delta
B -    975451 - SBL1, End
D -    602039 - SBL1, Delta
S - Flash Throughput, 55000 KB/s  (1143228 Bytes,  20618 us)
S - DDR Frequency, 400 MHz
Android Bootloader - UART_DM Initialized!!!
[0] welcome to lk

[10] platform_init()
[10] target_init()
[20] initialising mmc_slot =2
[20] Error: Command timeout error
[20] Failure getting OCR response from MMC Card
[30] MMC card failed to respond, try for SD card
[90] Done initialization of the card
[90] pm8x41_get_is_cold_boot: cold boot
[90] Not able to search the panel:
[100] Display not enabled for 24 HW type
[100] Target panel init not found!
[100] pm8x41_get_is_cold_boot: cold boot
[110] partition misc doesn't exist
[110] error in emmc_recovery_init
[110] Unable to locate /bootselect partition
[120] No 'misc' partition found
[120] Error reading MISC partition
[120] failed to get ffbm cookie[130] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
[130] Loading boot image (423936): start
[150] Loading boot image (423936): done
[160] DTB Total entry: 15, DTB version: 2
[160] Using DTB entry 0x000000f7/00000000/0x00010018/0 for device 0x000000f7/00010000/0x00010018/0
[170] Using pmic info 0x2000b/0x0/0x0/0x0 for device 0x2000b/0x0/0x0/0x0
[180] cmdline:  androidboot.emmc=true androidboot.serialno=e0000124 androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
[190] Updating device tree: start
[240] Updating device tree: done
[340] Error: Command timeout error
[340] card sleep error: mmc_put_card_to_sleep
[340] booting linux @ 0x80080000, ramdisk @ 0x82000000 (0), tags/device tree @ 0x81e00000
[350] Jumping to kernel via monitor
U-Boot 2016.01-rc1-00002-g77cc77b (Jan 11 2016 - 13:29:21 +0100)
Qualcomm-DragonBoard 410C

DRAM:  986 MiB
MMC:   msm_sdhci: 0, msm_sdhci: 1
reading uboot.env
In:    serial
Out:   serial
Err:   serial
Net:   Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot:  0 
22308864 bytes read in 6167 ms (3.4 MiB/s)
59281 bytes read in 92 ms (628.9 KiB/s)
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 0000000083000000, end 0000000083011790

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-2011-generic-dragon410c (ppisati@gloin) (gcc version 5.3.1 20160101 (Ubuntu/Linaro 5.3.1-5ubuntu1) ) #11
~5b62673 SMP PREEMPT Mon Feb 1 11:19:05 UTC 2016 (Ubuntu 4.2.0-2011.11~5b62673-generic-dragon410c 4.2.8-ckt1)
[    0.000000] CPU: AArch64 Processor [410fd030] revision 0
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] alternatives: enabling workaround for ARM errata 826319, 827319, 824069
[    0.000000] alternatives: enabling workaround for ARM erratum 845719
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 64 MiB at 0x00000000b9800000
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at /home/ppisati/ubuntu-xenial/arch/arm64/mm/numa.c:449 numa_init+0x8c/0x3ac()
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-2011-generic-dragon410c #11~5b62673
[    0.000000] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[    0.000000] Call trace:
[    0.000000] [<ffffffc00008aee8>] dump_backtrace+0x0/0x170
[    0.000000] [<ffffffc00008b07c>] show_stack+0x24/0x30
[    0.000000] [<ffffffc000dbf2e4>] dump_stack+0x84/0xc4
[    0.000000] [<ffffffc0000cb90c>] warn_slowpath_common+0xa4/0xe0
[    0.000000] [<ffffffc0000cbad4>] warn_slowpath_null+0x3c/0x50
[    0.000000] [<ffffffc001354080>] numa_init+0x8c/0x3ac
[    0.000000] [<ffffffc0013543d4>] arm64_numa_init+0x34/0x40
[    0.000000] [<ffffffc001353018>] bootmem_init+0x78/0x128
[    0.000000] [<ffffffc0013537ac>] paging_init+0x194/0x220
[    0.000000] [<ffffffc0013501e4>] setup_arch+0x28c/0x628
[    0.000000] [<ffffffc00134c72c>] start_kernel+0xf4/0x444
[    0.000000] ---[ end trace f24b6c88ae00fa9a ]---
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bd9fffff]
[    0.000000] NUMA: Ignoring memory range 0x0 - 0x80000000
[    0.000000] NUMA: Adding memblock 0 [0x80000000 - 0xbda00000] on node 0
[    0.000000] Initmem setup node 0 [mem 0x80000000-0xbd9fffff]
[    0.000000]   NODE_DATA [mem 0xbd9fa000-0xbd9fbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000bd9fffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x0000000085ffffff]
[    0.000000]   node   0: [mem 0x0000000086800000-0x000000008b5fffff]
[    0.000000]   node   0: [mem 0x000000008bc00000-0x000000008f7fffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x00000000bd9fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bd9fffff]
[    0.000000] PERCPU: Embedded 18 pages/cpu @ffffffc03d930000 s33096 r8192 d32440 u73728
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 242840
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyMSM0,115200n8 root=/dev/mmcblk1p9 net.ifnames=0 init=/lib/systemd/systemd rw rootwait panic=
-1
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] log_buf_len min size: 16384 bytes
[    0.000000] log_buf_len: 32768 bytes
[    0.000000] early log buf free: 12520(76%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] software IO TLB [mem 0xb4600000-0xb8600000] (64MB) mapped at [ffffffc034600000-ffffffc0385fffff]
[    0.000000] Memory: 802588K/987136K available (13672K kernel code, 1618K rwdata, 5568K rodata, 888K init, 13918K bss, 119012K reserved, 
65536K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc2000000 - 0xffffffbdc2f68000   (    15 MB actual)
[    0.000000]     fixed   : 0xffffffbffa7fd000 - 0xffffffbffac00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
[    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc03da00000   (   986 MB)
[    0.000000]       .init : 0xffffffc00134c000 - 0xffffffc00142a000   (   888 KB)
[    0.000000]       .text : 0xffffffc000080000 - 0xffffffc00134c000   ( 19248 KB)
[    0.000000]       .data : 0xffffffc001432000 - 0xffffffc0015c6800   (  1618 KB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Running RCU self tests
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU lockdep checking is enabled.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000681] Console: colour dummy device 80x25
[    0.000727] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000737] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000745] ... MAX_LOCK_DEPTH:          48
[    0.000754] ... MAX_LOCKDEP_KEYS:        8191
[    0.000762] ... CLASSHASH_SIZE:          4096
[    0.000770] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000779] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000788] ... CHAINHASH_SIZE:          32768
[    0.000796]  memory used by lock dependency info: 8159 kB
[    0.000805]  per task-struct memory footprint: 1920 bytes
[    0.000932] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000950] pid_max: default: 32768 minimum: 301
[    0.001210] Security Framework initialized
[    0.001279] AppArmor: AppArmor initialized
[    0.001288] Yama: becoming mindful.
[    0.002552] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.004104] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.004674] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.004708] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.006578] Initializing cgroup subsys blkio
[    0.006625] Initializing cgroup subsys memory
[    0.006706] Initializing cgroup subsys devices
[    0.006753] Initializing cgroup subsys freezer
[    0.006799] Initializing cgroup subsys net_cls
[    0.006824] Initializing cgroup subsys perf_event
[    0.006849] Initializing cgroup subsys net_prio
[    0.006874] Initializing cgroup subsys hugetlb
[    0.007001] ftrace: allocating 41033 entries in 161 pages
[    0.147810] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[    0.147897] EFI services will not be available.
[    0.190897] CPU1: Booted secondary processor
[    0.190914] Detected VIPT I-cache on CPU1
[    0.200723] CPU2: Booted secondary processor
[    0.200744] Detected VIPT I-cache on CPU2
[    0.210721] CPU3: Booted secondary processor
[    0.210743] Detected VIPT I-cache on CPU3
[    0.211041] Brought up 4 CPUs
[    0.211074] SMP: Total of 4 processors activated.
[    0.211084] CPU: All CPU(s) started at EL1
[    0.211279] alternatives: patching kernel code
[    0.214218] devtmpfs: initialized
[    0.291913] evm: security.selinux
[    0.291929] evm: security.SMACK64
[    0.291938] evm: security.SMACK64EXEC
[    0.291948] evm: security.SMACK64TRANSMUTE
[    0.291957] evm: security.SMACK64MMAP
[    0.291966] evm: security.ima
[    0.291975] evm: security.capability
[    0.292702] DMI not present or invalid.
[    0.293819] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.297512] pinctrl core: initialized pinctrl subsystem
[    0.303020] NET: Registered protocol family 16
[    0.327625] cpuidle: using governor ladder
[    0.351326] cpuidle: using governor menu
[    0.351735] vdso: 2 pages (1 code @ ffffffc001439000, 1 data @ ffffffc001438000)
[    0.351862] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.355890] DMA: preallocated 256 KiB pool for atomic allocations
[    0.356498] Serial: AMBA PL011 UART driver
[    0.370886] qcom-smd soc:smd: new channel 'rpm_requests' info-size: 88 fifo-size: 1024
[    0.402032] irq: no irq domain found for /soc/wcnss-smp2p/slave-kernel !
[    0.409951] irq: no irq domain found for /soc/qcom,mdss_mdp@1a00000 !
[    0.494348] ACPI: Interpreter disabled.
[    0.494641] msm_bus_fabric_init_driver
[    0.495308] msm_bus_device 580000.ad-hoc-bus: Dev 1024
[    0.495345] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[    0.495363] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[    0.495552] msm_bus_device 580000.ad-hoc-bus: Dev 0
[    0.495588] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[    0.495603] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[    0.495765] msm_bus_device 580000.ad-hoc-bus: Dev 4096
[    0.495801] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
[    0.495816] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
[    0.506208] msm_bus_init_clk: Valid node clk node 1024 ctx 0
[    0.506220] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid node clk node 0 ctx 0
[    0.506600] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
[    0.506970] msm_bus_init_clk: Valid node clk node 4096 ctx 1[    0.563728] msm_iommu 1f00000.qcom,iommu: invalid resource
[    0.563887] msm_iommu 1f00000.qcom,iommu: iface: 100000000, core: 1066000000
[    0.563982] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffffff80006c0000, with 2 ctx banks
[    0.564483] genirq: Setting trigger mode 1 for irq 155 failed (gic_set_type+0x0/0x68)
[    0.564764] msm_iommu 1f00000.qcom,iommu: Request Global CFG IRQ 155 failed with ret=-22
[    0.566855] msm_iommu 1e00000.qcom,iommu: iface: 100000000, core: 1066000000
[    0.566945] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8000880000, with 20 ctx banks
[    0.567240] genirq: Setting trigger mode 1 for irq 155 failed (gic_set_type+0x0/0x68)
[    0.567326] msm_iommu 1e00000.qcom,iommu: Request Global CFG IRQ 155 failed with ret=-22
[    0.584890] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
[    0.585525] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
[    0.586132] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
[    0.586630] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
[    0.587130] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
[    0.587614] msm_iommu_ctx 1e25000.venus_ns: context venus_ns using bank 5
[    0.588094] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
[    0.588659] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
[    0.589165] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
[    0.589639] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
[    0.590128] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
[    0.590595] msm_iommu_ctx 1e33000.venus_sec_pixel: context venus_sec_pixel using bank 19
[    0.591085] msm_iommu_ctx 1e34000.venus_sec_bitstream: context venus_sec_bitstream using bank 20
[    0.591567] msm_iommu_ctx 1e35000.venus_sec_non_pixel: context venus_sec_non_pixel using bank 21
[    0.592064] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
[    0.592550] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
[    0.593019] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
[    0.593508] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
[    0.593987] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
[    0.594453] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
[    0.594923] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
[    0.595390] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
[    0.596048] qcom_iommu: iommu sec: psize[0]: 94208, psize[1]: 0
[    0.598160] vgaarb: loaded
[    0.603399] SCSI subsystem initialized
[    0.604954] usbcore: registered new interface driver usbfs
[    0.605159] usbcore: registered new interface driver hub
[    0.605481] usbcore: registered new device driver usb
[    0.606381] media: Linux media interface: v0.10
[    0.606573] Linux video capture interface: v2.00
[    0.608046] dmi: Firmware registration failed.
[    0.609480] Advanced Linux Sound Architecture Driver Initialized.
[    0.612350] Bluetooth: Core ver 2.20
[    0.612456] NET: Registered protocol family 31
[    0.612467] Bluetooth: HCI device and connection manager initialized
[    0.612536] Bluetooth: HCI socket layer initialized
[    0.612565] Bluetooth: L2CAP socket layer initialized
[    0.612733] Bluetooth: SCO socket layer initialized
[    0.614200] NetLabel: Initializing
[    0.614213] NetLabel:  domain hash size = 128
[    0.614222] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.614469] NetLabel:  unlabeled traffic allowed by default
[    0.615924] clocksource: Switched to clocksource arch_sys_counter
[    0.941237] AppArmor: AppArmor Filesystem Enabled
[    0.942717] pnp: PnP ACPI: disabled
[    0.983168] NET: Registered protocol family 2
[    0.985319] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.986172] TCP bind hash table entries: 8192 (order: 7, 524288 bytes)
[    0.988579] TCP: Hash tables configured (established 8192 bind 8192)
[    0.988904] UDP hash table entries: 512 (order: 4, 81920 bytes)
[    0.989331] UDP-Lite hash table entries: 512 (order: 4, 81920 bytes)
[    0.990567] NET: Registered protocol family 1
[    0.992293] RPC: Registered named UNIX socket transport module.
[    0.992307] RPC: Registered udp transport module.
[    0.992318] RPC: Registered tcp transport module.
[    0.992328] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.994310] kvm [1]: HYP mode not available
[    1.001163] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    1.001490] Initialise system trusted keyring
[    1.001901] audit: initializing netlink subsys (disabled)
[    1.002099] audit: type=2000 audit(0.889:1): initialized
[    1.005111] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.051319] zpool: loaded
[    1.051342] zbud: loaded
[    1.055610] VFS: Disk quotas dquot_6.6.0
[    1.056500] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.075055] NFS: Registering the id_resolver key type
[    1.075166] Key type id_resolver registered
[    1.075179] Key type id_legacy registered
[    1.075222] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.076125] fuse init (API version 7.23)
[    1.078076] 9p: Installing v9fs 9p2000 file system support
[    1.080158] Key type big_key registered
[    1.092799] Key type asymmetric registered
[    1.092924] Asymmetric key parser 'x509' registered
[    1.093846] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.094402] io scheduler noop registered
[    1.094426] io scheduler deadline registered (default)
[    1.095275] io scheduler cfq registered
[    1.103595] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.103711] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.114130] msm_rpm_log_probe: OK
[    1.117114] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.151942] msm_serial 78af000.serial: msm_serial: detected port #1
[    1.152181] msm_serial 78af000.serial: uartclk = 3686400
[    1.152334] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 132, base_baud = 230400) is a MSM
[    1.154411] msm_serial 78b0000.serial: msm_serial: detected port #0
[    1.154597] msm_serial 78b0000.serial: uartclk = 3686400
[    1.154704] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 133, base_baud = 230400) is a MSM
[    1.154759] msm_serial: console setup on port #0
[    2.719544] console [ttyMSM0] enabled
[    2.725550] msm_serial: driver initialized
[    2.733356] [drm] Initialized drm 1.1.0 20060810
[    2.734222] l6: supplied by s4
[    2.748286] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[    2.749163] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[    2.754928] l2: supplied by s3
[    2.763749] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[    2.767357] msm 1a00000.qcom,mdss_mdp: failed to bind 1a98000.qcom,mdss_dsi (ops dsi_ops): -517
[    2.776842] msm 1a00000.qcom,mdss_mdp: master bind failed: -517
[    2.830475] brd: module loaded
[    2.854521] loop: module loaded
[    2.861315] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
[    2.896132] libphy: Fixed MDIO Bus: probed
[    2.896169] tun: Universal TUN/TAP device driver, 1.6
[    2.899113] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.905114] sky2: driver version 1.30
[    2.911639] PPP generic driver version 2.4.2
[    2.914967] usbcore: registered new interface driver asix
[    2.918583] usbcore: registered new interface driver ax88179_178a
[    2.923825] usbcore: registered new interface driver cdc_ether
[    2.929939] usbcore: registered new interface driver dm9601
[    2.935640] usbcore: registered new interface driver net1080
[    2.941132] usbcore: registered new interface driver plusb
[    2.947025] usbcore: registered new interface driver cdc_subset
[    2.952295] usbcore: registered new interface driver zaurus
[    2.958234] usbcore: registered new interface driver cdc_ncm
[    2.969065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.969479] ehci-pci: EHCI PCI platform driver
[    2.975984] ehci-platform: EHCI generic platform driver
[    2.980779] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    2.985848] msm_hsusb_host 78d9000.ehci: unable to find transceiver
[    2.991379] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.997192] ohci-pci: OHCI PCI platform driver
[    3.003530] ohci-platform: OHCI generic platform driver
[    3.008518] usbcore: registered new interface driver cdc_acm
[    3.012916] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.019060] usbcore: registered new interface driver usblp
[    3.026726] usbcore: registered new interface driver cdc_wdm
[    3.032243] usbcore: registered new interface driver uas
[    3.038149] usbcore: registered new interface driver usb-storage
[    3.043558] usbcore: registered new interface driver usbserial
[    3.049330] usbcore: registered new interface driver usbserial_generic
[    3.055168] usbserial: USB Serial support registered for generic
[    3.072414] usb3503 usb2513: switched to HUB mode
[    3.072438] usb3503 usb2513: usb3503_probe: probed in hub mode
[    3.079812] usbip_core: USB/IP Core v1.0.0
[    3.081962] usbcore: registered new device driver usbip-host
[    3.085949] usbip_host: USB/IP Host Driver v1.0.0
[    3.093447] mousedev: PS/2 mouse device common for all mice
[    3.100221] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pwrkey@800/input/input0
[    3.104047] i2c /dev entries driver
[    3.114195] i2c_qup 78b6000.i2c:                                                                                              [261/9920]
[    3.114195]  tx channel not available
[    3.120227] i2c_qup 78b8000.i2c: 
[    3.120227]  tx channel not available
[    3.125854] i2c_qup 78ba000.i2c: 
[    3.125854]  tx channel not available
[    3.135494] l3: supplied by s3
[    3.144704] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
[    3.147374] device-mapper: uevent: version 1.0.3
[    3.151765] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    3.154907] Bluetooth: HCI UART driver ver 2.3
[    3.162999] Bluetooth: HCI UART protocol H4 registered
[    3.167509] Bluetooth: HCI UART protocol BCSP registered
[    3.172598] Bluetooth: HCI UART protocol LL registered
[    3.178109] Bluetooth: HCI UART protocol ATH3K registered
[    3.183013] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    3.188514] Bluetooth: HCI UART protocol BCM registered
[    3.194787] usbcore: registered new interface driver btusb
[    3.200582] sdhci: Secure Digital Host Controller Interface driver
[    3.205321] sdhci: Copyright(c) Pierre Ossman
[    3.211653] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.224499] l5: supplied by s4
[    3.224937] sdhci_msm 7824900.sdhci: Failed getting OCR mask: 0
[    3.266275] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
[    3.272321] sdhci_msm 7864900.sdhci: Got CD GPIO
[    3.334142] mmc0: MAN_BKOPS_EN bit is not set
[    3.339418] mmc0: new high speed MMC card at address 0001
[    3.342010] mmcblk0: mmc0:0001 DS2008 7.28 GiB 
[    3.344285] mmcblk0boot0: mmc0:0001 DS2008 partition 1 4.00 MiB
[    3.348636] mmcblk0boot1: mmc0:0001 DS2008 partition 2 4.00 MiB
[    3.354492] mmcblk0rpmb: mmc0:0001 DS2008 partition 3 4.00 MiB
[    3.366462] Alternate GPT is invalid, using primary GPT.
[    3.366525]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[    3.390575] mmc1: Reset 0x1 never completed.
[    3.391356] sdhci_msm 7864900.sdhci: Failed getting OCR mask: 0
[    3.494184] mmc1: Reset 0x1 never completed.
[    3.536394] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
[    3.555018] ledtrig-cpu: registered to indicate activity on CPUs
[    3.555342] hidraw: raw HID events driver (C) Jiri Kosina
[    3.562037] usbcore: registered new interface driver usbhid
[    3.565434] usbhid: USB HID core driver
[    3.574395] l7: supplied by s4
[    3.576913] qcom-tz-pil soc:pronto_rproc: Found relocation area 6291456@0x000000008b600000
[    3.577937]  remoteproc0: soc:pronto_rproc is available
[    3.585972]  remoteproc0: Note: remoteproc is still under development and considered experimental.
[    3.591139]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    3.601081]  remoteproc0: Direct firmware load for wcnss.mdt failed with error -2
[    3.610615]  remoteproc0: failed to load soc:pronto_rproc
[    3.610761] qcom-tz-pil soc:vidc_tzpil@0: no crash reason id
[    3.611091] soc:vidc_tzpil@0 supply qcom,pll not found, using dummy regulator
[    3.611284] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uV, skipping
[    3.611294] qcom-tz-pil soc:vidc_tzpil@0: failed to read qcom,pll_uA, skipping
[    3.611306] qcom-tz-pil soc:vidc_tzpil@0: no wdog IRQ defined
[    3.611315] qcom-tz-pil soc:vidc_tzpil@0: no fatal IRQ defined
[    3.611324] qcom-tz-pil soc:vidc_tzpil@0: no ready IRQ defined
[    3.611333] qcom-tz-pil soc:vidc_tzpil@0: no handover IRQ defined
[    3.611342] qcom-tz-pil soc:vidc_tzpil@0: no stop-ack IRQ defined
[    3.611429] qcom-tz-pil soc:vidc_tzpil@0: Found relocation area 8388608@0x000000008f800000
[    3.611703]  remoteproc1: soc:vidc_tzpil@0 is available
[    3.611708]  remoteproc1: Note: remoteproc is still under development and considered experimental.
[    3.611714]  remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    3.612226]  remoteproc1: Direct firmware load for venus.mdt failed with error -2
[    3.612242]  remoteproc1: failed to load soc:vidc_tzpil@0
[    3.619202] usbcore: registered new interface driver snd-usb-audio
[    3.621845] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    3.621952] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    3.622074] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    3.622204] apq8016-lpass-cpu 7708000.lpass-cpu: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
[    3.625302][    3.630631] NET: Registered protocol family 10
[    3.634554] sit: IPv6 over IPv4 tunneling driver
[    3.636846] NET: Registered protocol family 17
[    3.637163] Bluetooth: RFCOMM TTY layer initialized
[    3.637190] Bluetooth: RFCOMM socket layer initialized
[    3.637242] Bluetooth: RFCOMM ver 1.11
[    3.637293] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.637366] Bluetooth: HIDP socket layer initialized
[    3.637786] 9pnet: Installing 9P2000 support
[    3.638076] Key type dns_resolver registered
[    3.640955] Loading compiled-in X.509 certificates
[    3.645137] Loaded X.509 cert 'Build time autogenerated kernel key: 04a844eedae4fe279ee13ee807f2adb313fc63c6'
[    3.645195] registered taskstats version 1
[    3.645325] zswap: loading zswap
[    3.645413] zswap: using zbud pool
[    3.645471] zswap: using lzo compressor
[    3.650178] Key type trusted registered
[    3.653593] Key type encrypted registered
[    3.653622] AppArmor: AppArmor sha1 policy hashing enabled
[    3.653642] ima: No TPM chip found, activating TPM-bypass!
[    3.654095] evm: HMAC attrs: 0x1
[    3.663314] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[    3.664321] 1a98000.qcom,mdss_dsi supply gdsc not found, using dummy regulator
[    3.712822] mmc1: new high speed SDHC card at address 59b4
[    3.714172] mmcblk1: mmc1:59b4 NCard 7.34 GiB 
[    3.834349]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
 qcom-apq8016-sbc 7702000.sound: error getting codec dai name
[    3.625311] qcom-apq8016-sbc 7702000.sound: Error resolving dai links: -517
[    3.839026] msm 1a00000.qcom,mdss_mdp: bound 1a98000.qcom,mdss_dsi (ops dsi_ops)
[    3.839085] msm 1a00000.qcom,mdss_mdp: bound 1c00000.qcom,adreno-3xx (ops a3xx_ops)
[    3.839192] 1a00000.qcom,mdss_mdp supply vdd not found, using dummy regulator
[    3.859336] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.859341] [drm] No driver support for vblank timestamp query.
[    3.866855] msm 1a00000.qcom,mdss_mdp: No connectors reported connected with modes
[    3.866882] [drm] Cannot find any crtc or sizes - going 1024x768
[    3.972952] Console: switching to colour frame buffer device 128x48
[    3.987124] msm 1a00000.qcom,mdss_mdp: fb0: msm frame buffer device
[    3.992140] msm 1a00000.qcom,mdss_mdp: registered panic notifier
[    4.026186] [drm] Initialized msm 1.0.0 20130625 on minor 0
[    4.028021] msm_otg 78d9000.phy: OTG regs = ffffff8000d94000
[    4.031446] msm_otg 78d9000.phy: no vddcx
[    4.153057] msm_hsusb_host 78d9000.ehci: EHCI Host Controller
[    4.155540] msm_hsusb_host 78d9000.ehci: new USB bus registered, assigned bus number 1
[    4.159631] msm_hsusb_host 78d9000.ehci: irq 144, io mem 0x078d9000
[    4.176050] msm_hsusb_host 78d9000.ehci: USB 2.0 started, EHCI 1.00
[    4.177925] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.181122] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.190371] usb usb1: Product: EHCI Host Controller
[    4.195182] usb usb1: Manufacturer: Linux 4.2.0-2011-generic-dragon410c ehci_hcd
[    4.195233] CPR closed loop is enabled
[    4.207639] usb usb1: SerialNumber: 78d9000.ehci
[    4.207845] CPR is enabled!
[    4.219649] hub 1-0:1.0: USB hub found
[    4.219894] hub 1-0:1.0: 1 port detected
[    4.224561] qcom-apq8016-sbc 7702000.sound: adv7511 <-> Quatenary MI2S mapping ok
[    4.233095] input: gpio_keys as /devices/platform/gpio_keys/input/input1
[    4.234521] hctosys: unable to open rtc device (rtc0)
[    4.277716] ALSA device list:
[    4.27[    4.281693] md: Waiting for all devices to be available before autodetect
[    4.281716] md: If you don't use raid, use raid=noautodetect
[    4.290932] md: Autodetecting RAID arrays.
[    4.293176] md: Scanned 0 and added 0 devices.
[    4.297111] md: autorun ...
[    4.301505] md: ... autorun DONE.
[    4.306706] EXT4-fs (mmcblk1p9): couldn't mount as ext3 due to feature incompatibilities
[    4.309332] EXT4-fs (mmcblk1p9): couldn't mount as ext2 due to feature incompatibilities
[    4.339845] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: (null)
[    4.339951] VFS: Mounted root (ext4 filesystem) on device 179:137.
[    4.360042] devtmpfs: mounted
[    4.360940] Freeing unused kernel memory: 888K (ffffffc00134c000 - ffffffc00142a000)
[    4.362000] Freeing alternatives memory: 20K (ffffffc00142a000 - ffffffc00142f000)
[    4.535979] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host
[    4.686665] usb 1-1: New USB device found, idVendor=0424, idProduct=2513
[    4.686691] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.695243] hub 1-1:1.0: USB hub found
[    4.699742] hub 1-1:1.0: 3 ports detected
[    4.789251] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    4.824361] random: systemd urandom read with 10 bits of entropy[    4.844351] systemd[1]: systemd 228 running in system mode. (+PAM +AU
DIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.845528] systemd[1]: Detected architecture arm64.

Welcome to Ubuntu 16.04!

[    4.898611] systemd[1]: Set hostname to <dragonboard410c>.
etcetc