[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-61-generic (buildd@lgw01-50) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #100-Ubuntu SMP Wed Jul 29 11:21:34 UTC 2015 (Ubuntu 3.13.0-61.100-generic 3.13.11-ckt22)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-61-generic root=UUID=6d5ab046-3af3-492d-9a3a-5374a2655b86 ro recovery nomodeset
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf7b1cff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf7b1d00-0x00000000cf7b3cff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf7b3d00-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000010bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Compaq dc7700p Convertible Minitower/0A58h, BIOS 786E1 v01.05 08/30/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x10c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E3FFF write-protect
[    0.000000]   E4000-EFFFF write-back
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF0000000 write-back
[    0.000000]   3 base 0CF800000 mask FFF800000 uncachable
[    0.000000]   4 base 100000000 mask FF8000000 write-back
[    0.000000]   5 base 108000000 mask FFC000000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3320MB, range: 8MB, type UC
[    0.000000] reg 4, base: 4GB, range: 128MB, type WB
[    0.000000] reg 5, base: 4224MB, range: 64MB, type WB
[    0.000000] total RAM covered: 3512M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 6  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3320MB, range: 8MB, type UC
[    0.000000] reg 4, base: 4GB, range: 128MB, type WB
[    0.000000] reg 5, base: 4224MB, range: 64MB, type WB
[    0.000000] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcf7b1 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x10be00000-0x10bffffff]
[    0.000000]  [mem 0x10be00000-0x10bffffff] page 2M
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x108000000-0x10bdfffff]
[    0.000000]  [mem 0x108000000-0x10bdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x107ffffff]
[    0.000000]  [mem 0x100000000-0x107ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcf7b0fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xcf5fffff] page 2M
[    0.000000]  [mem 0xcf600000-0xcf7b0fff] page 4k
[    0.000000] RAMDISK: [mem 0x35b48000-0x36d9bfff]
[    0.000000] ACPI: RSDP 00000000000e7610 000014 (v00 COMPAQ)
[    0.000000] ACPI: RSDT 00000000cf7c3d40 00003C (v01 HPQOEM SLIC-BPC 20060830      00000000)
[    0.000000] ACPI: FACP 00000000cf7c3de8 000074 (v01 COMPAQ BROADH2O 00000001      00000000)
[    0.000000] ACPI: DSDT 00000000cf7c410b 009558 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[    0.000000] ACPI: FACS 00000000cf7c3d00 000040
[    0.000000] ACPI: APIC 00000000cf7c3e5c 000068 (v01 COMPAQ BROADH2O 00000001      00000000)
[    0.000000] ACPI: ASF! 00000000cf7c3ec4 000063 (v32 COMPAQ BROADH2O 00000001      00000000)
[    0.000000] ACPI: MCFG 00000000cf7c3f27 00003C (v01 COMPAQ BROADH2O 00000001      00000000)
[    0.000000] ACPI: TCPA 00000000cf7c3f63 000032 (v01 COMPAQ BROADH2O 00000001      00000000)
[    0.000000] ACPI: SLIC 00000000cf7c3f95 000176 (v01 HPQOEM SLIC-BPC 00000001      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000010bffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x10bffffff]
[    0.000000]   NODE_DATA [mem 0x10bff7000-0x10bffbfff]
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880107e00000-ffff88010b5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x10bffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcf7b0fff]
[    0.000000]   node   0: [mem 0x100000000-0x10bffffff]
[    0.000000] On node 0 totalpages: 898895
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13215 pages used for memmap
[    0.000000]   DMA32 zone: 845745 pages, LIFO batch:31
[    0.000000]   Normal zone: 768 pages used for memmap
[    0.000000]   Normal zone: 49152 pages, LIFO batch:15
[    0.000000] ACPI: PM-Timer IO Port: 0xf808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf7b1000-0xcf7b1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf7b2000-0xcf7b2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf7b3000-0xcf7b3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf7b4000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xf3ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88010bc00000 s81536 r8192 d20864 u1048576
[    0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 884827
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-61-generic root=UUID=6d5ab046-3af3-492d-9a3a-5374a2655b86 ro recovery nomodeset
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3436544K/3595580K available (7394K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 159036K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-1.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 14680064 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2127.967 MHz processor
[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.93 BogoMIPS (lpj=8511868)
[    0.008099] pid_max: default: 32768 minimum: 301
[    0.008186] Security Framework initialized
[    0.008257] AppArmor: AppArmor initialized
[    0.008301] Yama: becoming mindful.
[    0.008859] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.013122] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.014856] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.014919] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.015381] Initializing cgroup subsys memory
[    0.015438] Initializing cgroup subsys devices
[    0.015484] Initializing cgroup subsys freezer
[    0.015530] Initializing cgroup subsys blkio
[    0.015575] Initializing cgroup subsys perf_event
[    0.015622] Initializing cgroup subsys hugetlb
[    0.015695] CPU: Physical Processor ID: 0
[    0.015739] CPU: Processor Core ID: 0
[    0.015783] mce: CPU supports 6 MCE banks
[    0.015836] CPU0: Thermal monitoring enabled (TM2)
[    0.015884] process: using mwait in idle threads
[    0.015934] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.015934] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.015934] tlb_flushall_shift: -1
[    0.016116] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[    0.017862] ACPI: Core revision 20131115
[    0.020208] ACPI: All ACPI Tables successfully acquired
[    0.023081] ftrace: allocating 28586 entries in 112 pages
[    0.032479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.075111] smpboot: CPU0: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz (fam: 06, model: 0f, stepping: 06)
[    0.076000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.076000] perf_event_intel: PEBS disabled due to CPU errata
[    0.076000] ... version:                2
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      2
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             000000007fffffff
[    0.076000] ... fixed-purpose events:   3
[    0.076000] ... event mask:             0000000700000003
[    0.076000] x86: Booting SMP configuration:
[    0.076000] .... node  #0, CPUs:      #1
[    0.088049] x86: Booted up 1 node, 2 CPUs
[    0.088131] smpboot: Total of 2 processors activated (8511.86 BogoMIPS)
[    0.088261] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.089570] devtmpfs: initialized
[    0.097122] EVM: security.selinux
[    0.097165] EVM: security.SMACK64
[    0.097206] EVM: security.ima
[    0.097246] EVM: security.capability
[    0.097316] PM: Registering ACPI NVS region [mem 0xcf7b1d00-0xcf7b3cff] (8192 bytes)
[    0.097316] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[    0.097338] pinctrl core: initialized pinctrl subsystem
[    0.097467] regulator-dummy: no parameters
[    0.097539] RTC time: 18:26:42, date: 08/17/15
[    0.097628] NET: Registered protocol family 16
[    0.097808] cpuidle: using governor ladder
[    0.097851] cpuidle: using governor menu
[    0.097933] ACPI: bus type PCI registered
[    0.097977] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.098089] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.098160] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.104557] PCI: Using configuration type 1 for base access
[    0.105723] bio: create slab <bio-0> at 0
[    0.105723] ACPI: Added _OSI(Module Device)
[    0.105723] ACPI: Added _OSI(Processor Device)
[    0.105723] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.105723] ACPI: Added _OSI(Processor Aggregator Device)
[    0.116054] ACPI: SSDT 00000000cf7ce251 000320 (v01 COMPAQ  CPU_TM2 00000001 MSFT 0100000E)
[    0.116410] ACPI: Dynamic OEM Table Load:
[    0.117056] ACPI: SSDT           (null) 000320 (v01 COMPAQ  CPU_TM2 00000001 MSFT 0100000E)
[    0.128193] ACPI: Interpreter enabled
[    0.128240] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.128348] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.128465] ACPI: (supports S0 S3 S4 S5)
[    0.128508] ACPI: Using IOAPIC for interrupt routing
[    0.128577] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.128740] ACPI: No dock devices found.
[    0.140160] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.140226] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.140297] ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20131115/nsarguments-189)
[    0.140459] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
[    0.140585] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880106083b90), AE_ALREADY_EXISTS (20131115/psparse-536)
[    0.140738] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.140845] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[    0.141136] acpi PNP0A08:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored)
[    0.141140] acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.141143] acpi PNP0A08:00: host bridge window [io  0x1000-0x2fff] (ignored)
[    0.141145] acpi PNP0A08:00: host bridge window [io  0x3000-0x6fff] (ignored)
[    0.141148] acpi PNP0A08:00: host bridge window [io  0x7000-0xafff] (ignored)
[    0.141150] acpi PNP0A08:00: host bridge window [io  0xb000-0xffff] (ignored)
[    0.141152] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.141155] acpi PNP0A08:00: host bridge window [mem 0xd0000000-0xf3ffffff] (ignored)
[    0.141157] PCI: root bus 00: using default resources
[    0.141164] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.141396] PCI host bridge to bus 0000:00
[    0.141442] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.141488] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.141536] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.141594] pci 0000:00:00.0: [8086:2990] type 00 class 0x060000
[    0.141695] pci 0000:00:02.0: [8086:2992] type 00 class 0x030000
[    0.141706] pci 0000:00:02.0: reg 0x10: [mem 0xf0400000-0xf04fffff]
[    0.141718] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.141724] pci 0000:00:02.0: reg 0x20: [io  0x2110-0x2117]
[    0.141819] pci 0000:00:03.0: [8086:2994] type 00 class 0x078000
[    0.141837] pci 0000:00:03.0: reg 0x10: [mem 0xf0526900-0xf052690f 64bit]
[    0.141893] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.141971] pci 0000:00:03.2: [8086:2996] type 00 class 0x010185
[    0.141986] pci 0000:00:03.2: reg 0x10: [io  0x2118-0x211f]
[    0.141994] pci 0000:00:03.2: reg 0x14: [io  0x2140-0x2143]
[    0.142002] pci 0000:00:03.2: reg 0x18: [io  0x2120-0x2127]
[    0.142010] pci 0000:00:03.2: reg 0x1c: [io  0x2144-0x2147]
[    0.142017] pci 0000:00:03.2: reg 0x20: [io  0x20e0-0x20ef]
[    0.142127] pci 0000:00:03.3: [8086:2997] type 00 class 0x070002
[    0.142142] pci 0000:00:03.3: reg 0x10: [io  0x2128-0x212f]
[    0.142150] pci 0000:00:03.3: reg 0x14: [mem 0xf0524000-0xf0524fff]
[    0.142297] pci 0000:00:19.0: [8086:104a] type 00 class 0x020000
[    0.142314] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
[    0.142322] pci 0000:00:19.0: reg 0x14: [mem 0xf0525000-0xf0525fff]
[    0.142331] pci 0000:00:19.0: reg 0x18: [io  0x2000-0x201f]
[    0.142386] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.142433] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.142517] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.142555] pci 0000:00:1a.0: reg 0x20: [io  0x2020-0x203f]
[    0.142618] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.142699] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.142738] pci 0000:00:1a.1: reg 0x20: [io  0x2040-0x205f]
[    0.142799] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.142888] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.142907] pci 0000:00:1a.7: reg 0x10: [mem 0xf0526000-0xf05263ff]
[    0.142987] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.143033] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.143123] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.143138] pci 0000:00:1b.0: reg 0x10: [mem 0xf0520000-0xf0523fff 64bit]
[    0.143204] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.143283] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.143349] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.143399] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.143488] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.143527] pci 0000:00:1d.0: reg 0x20: [io  0x2060-0x207f]
[    0.143588] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.143667] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.143706] pci 0000:00:1d.1: reg 0x20: [io  0x2080-0x209f]
[    0.143766] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.143856] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.143875] pci 0000:00:1d.7: reg 0x10: [mem 0xf0526400-0xf05267ff]
[    0.143955] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.144012] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.144093] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.144180] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.144267] pci 0000:00:1f.0: [8086:2814] type 00 class 0x060100
[    0.144344] pci 0000:00:1f.0: address space collision: [io  0xf800-0xf87f] conflicts with ACPI PM1a_EVT_BLK [??? 0x0000f800-0x0000f803 flags 0x80000000]
[    0.144426] pci 0000:00:1f.0: quirk: [io  0xfa00-0xfa3f] claimed by ICH6 GPIO
[    0.144477] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[    0.144544] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[    0.144611] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[    0.144774] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018a
[    0.144788] pci 0000:00:1f.2: reg 0x10: [io  0x2130-0x2137]
[    0.144796] pci 0000:00:1f.2: reg 0x14: [io  0x2148-0x214b]
[    0.144804] pci 0000:00:1f.2: reg 0x18: [io  0x2138-0x213f]
[    0.144812] pci 0000:00:1f.2: reg 0x1c: [io  0x214c-0x214f]
[    0.144820] pci 0000:00:1f.2: reg 0x20: [io  0x20f0-0x20ff]
[    0.144828] pci 0000:00:1f.2: reg 0x24: [io  0x2100-0x210f]
[    0.144857] pci 0000:00:1f.2: PME# supported from D3hot
[    0.144993] pci 0000:00:1c.0: PCI bridge to [bus 20]
[    0.145101] pci 0000:07:09.0: [1106:3249] type 00 class 0x010400
[    0.145119] pci 0000:07:09.0: reg 0x10: [io  0x1120-0x112f]
[    0.145130] pci 0000:07:09.0: reg 0x14: [io  0x1130-0x113f]
[    0.145140] pci 0000:07:09.0: reg 0x18: [io  0x1140-0x114f]
[    0.145150] pci 0000:07:09.0: reg 0x1c: [io  0x1150-0x115f]
[    0.145161] pci 0000:07:09.0: reg 0x20: [io  0x1100-0x111f]
[    0.145171] pci 0000:07:09.0: reg 0x24: [io  0x1000-0x10ff]
[    0.145182] pci 0000:07:09.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.145267] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.145318] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.145326] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.145329] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.145647] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
[    0.145961] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.146270] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
[    0.146580] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[    0.146889] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
[    0.147198] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.147509] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.147817] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.148395] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.148481] ACPI: \_SB_.PCI0: notify handler is installed
[    0.148514] Found 1 acpi root devices
[    0.148609] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.148609] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.148609] vgaarb: loaded
[    0.148609] vgaarb: bridge control possible 0000:00:02.0
[    0.148609] SCSI subsystem initialized
[    0.148609] libata version 3.00 loaded.
[    0.148609] ACPI: bus type USB registered
[    0.148609] usbcore: registered new interface driver usbfs
[    0.148609] usbcore: registered new interface driver hub
[    0.148609] usbcore: registered new device driver usb
[    0.148609] PCI: Using ACPI for IRQ routing
[    0.149429] PCI: pci_cache_line_size set to 64 bytes
[    0.149473] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.149476] e820: reserve RAM buffer [mem 0xcf7b1d00-0xcfffffff]
[    0.149586] NetLabel: Initializing
[    0.149628] NetLabel:  domain hash size = 128
[    0.149671] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.149732] NetLabel:  unlabeled traffic allowed by default
[    0.149791] Switched to clocksource refined-jiffies
[    0.159604] AppArmor: AppArmor Filesystem Enabled
[    0.159700] pnp: PnP ACPI init
[    0.159759] ACPI: bus type PNP registered
[    0.159892] pnp 00:00: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.159907] pnp 00:01: [dma 4]
[    0.159928] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.159964] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.160024] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.160056] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[    0.160095] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.160346] pnp 00:06: [dma 3]
[    0.160413] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.160670] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[    0.160828] pnp 00:08: [dma 2]
[    0.160861] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.160944] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active)
[    0.161173] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.161201] pnp 00:0b: disabling [io  0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.161274] pnp 00:0b: disabling [io  0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.161346] pnp 00:0b: disabling [io  0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.161418] pnp 00:0b: disabling [io  0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io  0xf800-0xf87f]
[    0.161521] system 00:0b: [io  0x0400-0x041f] has been reserved
[    0.161570] system 00:0b: [io  0x0420-0x043f] has been reserved
[    0.161617] system 00:0b: [io  0x0440-0x045f] has been reserved
[    0.161665] system 00:0b: [io  0x0460-0x047f] could not be reserved
[    0.161713] system 00:0b: [io  0x0480-0x048f] has been reserved
[    0.161761] system 00:0b: [io  0xfa00-0xfa3f] has been reserved
[    0.161809] system 00:0b: [io  0xfc00-0xfc7f] has been reserved
[    0.161857] system 00:0b: [io  0xfc80-0xfcff] has been reserved
[    0.161904] system 00:0b: [io  0xfe00-0xfe7f] has been reserved
[    0.161952] system 00:0b: [io  0xfe80-0xfeff] has been reserved
[    0.162000] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.162057] system 00:0c: [io  0x04d0-0x04d1] has been reserved
[    0.162105] system 00:0c: [io  0x0cb0-0x0cbf] has been reserved
[    0.162153] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.164068] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.164123] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.164186] system 00:0d: [mem 0x000e4000-0x000fffff] could not be reserved
[    0.164237] system 00:0d: [mem 0xfec01000-0xfecfffff] has been reserved
[    0.164286] system 00:0d: [mem 0xfed00000-0xfed3ffff] has been reserved
[    0.164336] system 00:0d: [mem 0xfed40000-0xffffffff] could not be reserved
[    0.164386] system 00:0d: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.164435] system 00:0d: [mem 0x000cd000-0x000e3fff] has been reserved
[    0.164485] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.164497] pnp: PnP ACPI: found 14 devices
[    0.164540] ACPI: bus type PNP unregistered
[    0.171005] Switched to clocksource acpi_pm
[    0.171064] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 20] add_size 1000
[    0.171068] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000
[    0.171071] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20] add_size 200000
[    0.171083] pci 0000:00:1f.0: BAR 13: [io  0xf800-0xf87f] has bogus alignment
[    0.171134] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.171137] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.171140] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.171145] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[    0.171195] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[    0.171262] pci 0000:00:1e.0: BAR 15: assigned [mem 0xd0400000-0xd04fffff pref]
[    0.171329] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.171377] pci 0000:00:1c.0: PCI bridge to [bus 20]
[    0.171424] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.171474] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd01fffff]
[    0.171525] pci 0000:00:1c.0:   bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[    0.171596] pci 0000:07:09.0: BAR 6: assigned [mem 0xd0400000-0xd040ffff pref]
[    0.171661] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.171707] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.171759] pci 0000:00:1e.0:   bridge window [mem 0xd0400000-0xd04fffff pref]
[    0.171828] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.171831] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.171833] pci_bus 0000:20: resource 0 [io  0x3000-0x3fff]
[    0.171836] pci_bus 0000:20: resource 1 [mem 0xd0000000-0xd01fffff]
[    0.171838] pci_bus 0000:20: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[    0.171841] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
[    0.171843] pci_bus 0000:07: resource 2 [mem 0xd0400000-0xd04fffff pref]
[    0.171846] pci_bus 0000:07: resource 4 [io  0x0000-0xffff]
[    0.171848] pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff]
[    0.171890] NET: Registered protocol family 2
[    0.171890] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.171890] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.171890] TCP: Hash tables configured (established 32768 bind 32768)
[    0.171890] TCP: reno registered
[    0.171890] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.171890] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.171890] NET: Registered protocol family 1
[    0.171890] pci 0000:00:02.0: Video device with shadowed ROM
[    0.171890] PCI: CLS 64 bytes, default 64
[    0.171890] Trying to unpack rootfs image as initramfs...
[    0.566853] Freeing initrd memory: 18768K (ffff880035b48000 - ffff880036d9c000)
[    0.566933] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.566982] software IO TLB [mem 0xcb7b1000-0xcf7b1000] (64MB) mapped at [ffff8800cb7b1000-ffff8800cf7b0fff]
[    0.567391] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0x44
[    0.567441] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0x44
[    0.567578] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.567647] Scanning for low memory corruption every 60 seconds
[    0.567956] Initialise system trusted keyring
[    0.568082] audit: initializing netlink socket (disabled)
[    0.568144] type=2000 audit(1439836002.567:1): initialized
[    0.600875] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.602384] zbud: loaded
[    0.602586] VFS: Disk quotas dquot_6.5.2
[    0.602675] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.603289] fuse init (API version 7.22)
[    0.603421] msgmni has been set to 6748
[    0.603527] Key type big_key registered
[    0.604089] Key type asymmetric registered
[    0.604135] Asymmetric key parser 'x509' registered
[    0.604216] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.604317] io scheduler noop registered
[    0.604362] io scheduler deadline registered (default)
[    0.604441] io scheduler cfq registered
[    0.604609] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.604688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.604749] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.604852] intel_idle: does not run on family 6 model 15
[    0.604859] ipmi message handler version 39.2
[    0.604984] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.605055] ACPI: Power Button [PBTN]
[    0.605142] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.605209] ACPI: Power Button [PWRF]
[    0.605396] GHES: HEST is not enabled!
[    0.605544] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.625990] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.647757] 0000:00:03.3: ttyS4 at I/O 0x2128 (irq = 17, base_baud = 115200) is a 16550A
[    0.648589] Linux agpgart interface v0.103
[    0.648694] agpgart-intel 0000:00:00.0: Intel 965Q Chipset
[    0.648806] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.649354] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.649528] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    0.651181] brd: module loaded
[    0.652072] loop: module loaded
[    0.652258] ata_piix 0000:00:1f.2: version 2.13
[    0.652409] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.808502] scsi0 : ata_piix
[    0.808639] scsi1 : ata_piix
[    0.808722] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x20f0 irq 14
[    0.808775] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x20f8 irq 15
[    0.809243] scsi2 : ata_generic
[    0.809366] scsi3 : ata_generic
[    0.809447] ata3: PATA max UDMA/100 cmd 0x2118 ctl 0x2140 bmdma 0x20e0 irq 18
[    0.809497] ata4: PATA max UDMA/100 cmd 0x2120 ctl 0x2144 bmdma 0x20e8 irq 18
[    0.809948] libphy: Fixed MDIO Bus: probed
[    0.810104] tun: Universal TUN/TAP device driver, 1.6
[    0.810149] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.810254] PPP generic driver version 2.4.2
[    0.810350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.810402] ehci-pci: EHCI PCI platform driver
[    0.810596] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.810648] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.810725] ehci-pci 0000:00:1a.7: debug port 1
[    0.814679] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    0.814695] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0526000
[    0.824043] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.824158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.824221] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.824286] usb usb1: Product: EHCI Host Controller
[    0.824332] usb usb1: Manufacturer: Linux 3.13.0-61-generic ehci_hcd
[    0.824380] usb usb1: SerialNumber: 0000:00:1a.7
[    0.824556] hub 1-0:1.0: USB hub found
[    0.824606] hub 1-0:1.0: 4 ports detected
[    0.824892] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.824943] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.825020] ehci-pci 0000:00:1d.7: debug port 1
[    0.828961] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.828976] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0526400
[    0.840044] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.840143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.840196] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.840273] usb usb2: Product: EHCI Host Controller
[    0.840318] usb usb2: Manufacturer: Linux 3.13.0-61-generic ehci_hcd
[    0.840366] usb usb2: SerialNumber: 0000:00:1d.7
[    0.840512] hub 2-0:1.0: USB hub found
[    0.840560] hub 2-0:1.0: 4 ports detected
[    0.840717] ehci-platform: EHCI generic platform driver
[    0.840771] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.840818] ohci-pci: OHCI PCI platform driver
[    0.840874] ohci-platform: OHCI generic platform driver
[    0.840925] uhci_hcd: USB Universal Host Controller Interface driver
[    0.841099] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.841149] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.841236] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002020
[    0.841330] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.841380] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.841446] usb usb3: Product: UHCI Host Controller
[    0.841491] usb usb3: Manufacturer: Linux 3.13.0-61-generic uhci_hcd
[    0.841539] usb usb3: SerialNumber: 0000:00:1a.0
[    0.841679] hub 3-0:1.0: USB hub found
[    0.841728] hub 3-0:1.0: 2 ports detected
[    0.841972] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.842022] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.842116] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002040
[    0.842212] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.842262] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.842328] usb usb4: Product: UHCI Host Controller
[    0.842373] usb usb4: Manufacturer: Linux 3.13.0-61-generic uhci_hcd
[    0.842421] usb usb4: SerialNumber: 0000:00:1a.1
[    0.842561] hub 4-0:1.0: USB hub found
[    0.842609] hub 4-0:1.0: 2 ports detected
[    0.842846] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.842897] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.842982] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002060
[    0.843075] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.843125] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.843190] usb usb5: Product: UHCI Host Controller
[    0.843236] usb usb5: Manufacturer: Linux 3.13.0-61-generic uhci_hcd
[    0.843284] usb usb5: SerialNumber: 0000:00:1d.0
[    0.843427] hub 5-0:1.0: USB hub found
[    0.843476] hub 5-0:1.0: 2 ports detected
[    0.843718] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.843768] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.843852] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002080
[    0.843945] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.843995] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.844076] usb usb6: Product: UHCI Host Controller
[    0.844121] usb usb6: Manufacturer: Linux 3.13.0-61-generic uhci_hcd
[    0.844170] usb usb6: SerialNumber: 0000:00:1d.1
[    0.844316] hub 6-0:1.0: USB hub found
[    0.844364] hub 6-0:1.0: 2 ports detected
[    0.844564] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[    0.847434] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.847485] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.847679] mousedev: PS/2 mouse device common for all mice
[    0.847885] rtc_cmos 00:02: RTC can wake from S4
[    0.848066] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.848134] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[    0.848262] device-mapper: uevent: version 1.0.3
[    0.848381] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.848454] ledtrig-cpu: registered to indicate activity on CPUs
[    0.848620] TCP: cubic registered
[    0.848768] NET: Registered protocol family 10
[    0.849030] NET: Registered protocol family 17
[    0.849084] Key type dns_resolver registered
[    0.849377] Loading compiled-in X.509 certificates
[    0.850675] Loaded X.509 cert 'Magrathea: Glacier signing key: b2626663385c770ec7e384a8909ccd47c2d200e1'
[    0.850760] registered taskstats version 1
[    0.853458] Key type trusted registered
[    0.857879] Key type encrypted registered
[    0.857927] AppArmor: AppArmor sha1 policy hashing enabled
[    0.857974] IMA: No TPM chip found, activating TPM-bypass!
[    0.858258] regulator-dummy: disabling
[    0.858351]   Magic number: 11:573:443
[    0.858536] rtc_cmos 00:02: setting system clock to 2015-08-17 18:26:43 UTC (1439836003)
[    0.879644] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.916204] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.916262] EDD information not available.
[    0.916339] PM: Hibernation image not present or could not be loaded.
[    1.464060] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[    1.564047] tsc: Refined TSC clocksource calibration: 2127.999 MHz
[    1.604088] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.604160] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.604333] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.604393] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.612245] ata1.00: ATA-7: ST3160812AS, 3.AHL, max UDMA/100
[    1.612296] ata1.00: 312581808 sectors, multi 16: LBA48 
[    1.620205] ata2.00: ATAPI: HL-DT-STDVD+-RW GSA-H31L, 1.05, max UDMA/100
[    1.620272] ata2.01: ATA-7: SAMSUNG HD160JJ/P, ZM100-51, max UDMA/100
[    1.620321] ata2.01: 312581808 sectors, multi 16: LBA48 
[    1.632174] ata1.00: configured for UDMA/100
[    1.632363] scsi 0:0:0:0: Direct-Access     ATA      ST3160812AS      3.AH PQ: 0 ANSI: 5
[    1.632570] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.632579] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.632643] sd 0:0:0:0: [sda] Write Protect is off
[    1.632646] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.632673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.636186] ata2.00: configured for UDMA/100
[    1.639938] usb 6-2: New USB device found, idVendor=046d, idProduct=c077
[    1.639992] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.640056] usb 6-2: Product: USB Optical Mouse
[    1.640119] usb 6-2: Manufacturer: Logitech
[    1.652221] ata2.01: configured for UDMA/100
[    1.655540] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-H31L 1.05 PQ: 0 ANSI: 5
[    1.658987] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.659040] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.659207] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.659289] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.660087] scsi 1:0:1:0: Direct-Access     ATA      SAMSUNG HD160JJ/ ZM10 PQ: 0 ANSI: 5
[    1.660266] sd 1:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.660276] sd 1:0:1:0: Attached scsi generic sg2 type 0
[    1.660472] sd 1:0:1:0: [sdb] Write Protect is off
[    1.660522] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.660569] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.676774]  sda: sda1 sda2 < sda5 >
[    1.677216] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.706317]  sdb: sdb1 sdb2 < sdb5 sdb6 >
[    1.706773] sd 1:0:1:0: [sdb] Attached SCSI disk
[    1.828142] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    1.828775] Write protecting the kernel read-only data: 12288k
[    1.831478] Freeing unused kernel memory: 788K (ffff88000173b000 - ffff880001800000)
[    1.833905] Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
[    1.848263] systemd-udevd[108]: starting version 204
[    1.875514] pps_core: LinuxPPS API ver. 1 registered
[    1.875577] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.877369] PTP clock support registered
[    1.885238] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.885315] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.886718] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.886819] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    1.894648] sata_via 0000:07:09.0: version 2.6
[    1.894818] sata_via 0000:07:09.0: routed to hard irq line 5
[    1.895265] scsi4 : sata_via
[    1.901604] hidraw: raw HID events driver (C) Jiri Kosina
[    1.902024] FDC 0 is a post-1991 82077
[    1.906933] scsi5 : sata_via
[    1.908100] scsi6 : sata_via
[    1.908217] ata5: SATA max UDMA/133 port i16@0x1120 bmdma 0x1100 irq 21
[    1.908271] ata6: SATA max UDMA/133 port i16@0x1130 bmdma 0x1108 irq 21
[    1.908322] ata7: PATA max UDMA/133 port i16@0x1140 bmdma 0x1110 irq 21
[    1.918236] usbcore: registered new interface driver usbhid
[    1.918289] usbhid: USB HID core driver
[    1.944071] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input5
[    1.944277] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[    2.222031] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:0f:fe:8b:f4:27
[    2.222104] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.222176] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: 1002FF-0FF
[    2.242933] ata5: SATA link down (SStatus 0 SControl 310)
[    2.570911] ata6: SATA link down (SStatus 0 SControl 310)
[    2.571109] Switched to clocksource tsc
[    2.580709] random: nonblocking pool is initialized
[    2.591899] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    4.692288] systemd-udevd[216]: starting version 204
[    5.675911] wmi: Mapper loaded
[    5.679203] mei_me 0000:00:03.0: irq 42 for MSI/MSI-X
[    5.696898] parport_pc 00:06: reported by Plug and Play ACPI
[    5.697000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[    6.338689] [drm] Initialized drm 1.1.0 20060810
[    6.915345] ppdev: user-space parallel port driver
[    7.051583] coretemp coretemp.0: Using relative temperature scale!
[    7.051659] coretemp coretemp.0: Using relative temperature scale!
[    7.084353] input: HP WMI hotkeys as /devices/virtual/input/input6
[    7.913460] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.676069] mei_me 0000:00:03.0: wait hw ready failed. status = -110
[   12.676127] mei_me 0000:00:03.0: hw_start failed ret = -110
[   12.676177] mei_me 0000:00:03.0: reset failed
[   12.676224] mei_me 0000:00:03.0: link layer initialization failed.
[   12.676283] mei_me 0000:00:03.0: init hw failure.
[   12.676537] mei_me 0000:00:03.0: initialization failed.
[   12.676786] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.677030] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   12.715850] hda_codec: ALC262: SKU not ready 0x411111f0
[   12.716137] autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[   12.716142]    speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
[   12.716144]    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   12.716145]    mono: mono_out=0x0
[   12.716147]    inputs:
[   12.716149]      Rear Mic=0x18
[   12.716151]      Front Mic=0x1a
[   12.716153]      Line=0x19
[   12.716155] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[   12.716156] realtek: Enable default setup for auto mode as fallback
[   12.725635] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.725737] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.725817] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.725895] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   12.725973] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   12.727999] gpio_ich: GPIO from 206 to 255 on gpio_ich
[   22.590562] Adding 3593212k swap on /dev/sdb6.  Priority:-1 extents:1 across:3593212k FS
[   39.721873] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[   62.152108] usb 6-2: USB disconnect, device number 2
[   63.580047] usb 6-2: new low-speed USB device number 3 using uhci_hcd
[   63.756054] usb 6-2: New USB device found, idVendor=046d, idProduct=c077
[   63.756058] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   63.756062] usb 6-2: Product: USB Optical Mouse
[   63.756065] usb 6-2: Manufacturer: Logitech
[   63.771503] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input12
[   63.771632] hid-generic 0003:046D:C077.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[  123.904123] usb 6-2: USB disconnect, device number 3
[  125.432113] usb 6-2: new low-speed USB device number 4 using uhci_hcd
[  125.607053] usb 6-2: New USB device found, idVendor=046d, idProduct=c077
[  125.607058] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  125.607062] usb 6-2: Product: USB Optical Mouse
[  125.607065] usb 6-2: Manufacturer: Logitech
[  125.622501] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input13
[  125.622633] hid-generic 0003:046D:C077.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[  185.656103] usb 6-2: USB disconnect, device number 4
[  187.284051] usb 6-2: new low-speed USB device number 5 using uhci_hcd
[  187.460054] usb 6-2: New USB device found, idVendor=046d, idProduct=c077
[  187.460060] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  187.460063] usb 6-2: Product: USB Optical Mouse
[  187.460066] usb 6-2: Manufacturer: Logitech
[  187.475499] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input14
[  187.475628] hid-generic 0003:046D:C077.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[  247.656104] usb 6-2: USB disconnect, device number 5
[  249.136050] usb 6-2: new low-speed USB device number 6 using uhci_hcd
[  249.312055] usb 6-2: New USB device found, idVendor=046d, idProduct=c077
[  249.312060] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  249.312064] usb 6-2: Product: USB Optical Mouse
[  249.312067] usb 6-2: Manufacturer: Logitech
[  249.327496] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input15
[  249.327630] hid-generic 0003:046D:C077.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[  309.408116] usb 6-2: USB disconnect, device number 6
[  310.988050] usb 6-2: new low-speed USB device number 7 using uhci_hcd
[  311.164055] usb 6-2: New USB device found, idVendor=046d, idProduct=c077
[  311.164060] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  311.164063] usb 6-2: Product: USB Optical Mouse
[  311.164067] usb 6-2: Manufacturer: Logitech
[  311.179502] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input16
[  311.179630] hid-generic 0003:046D:C077.0006: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[  363.447685] init: friendly-recovery main process (395) killed by INT signal
[  363.536876] init: plymouth-upstart-bridge main process (627) terminated with status 1
[  363.536892] init: plymouth-upstart-bridge main process ended, respawning
[  363.576153] init: plymouth-upstart-bridge main process (662) terminated with status 1
[  363.576170] init: plymouth-upstart-bridge main process ended, respawning
[  363.586730] lp0: using parport0 (interrupt-driven).
[  363.597782] vhba: module verification failed: signature and/or  required key missing - tainting kernel
[  363.602269] init: plymouth-upstart-bridge main process (667) terminated with status 1
[  363.602286] init: plymouth-upstart-bridge main process ended, respawning
[  363.602865] scsi7 : vhba
[  363.617841] init: plymouth-upstart-bridge main process (671) terminated with status 1
[  363.617857] init: plymouth-upstart-bridge main process ended, respawning
[  363.637902] init: plymouth-upstart-bridge main process (676) terminated with status 1
[  363.637918] init: plymouth-upstart-bridge main process ended, respawning
[  363.659601] init: plymouth-upstart-bridge main process (678) terminated with status 1
[  363.659617] init: plymouth-upstart-bridge main process ended, respawning
[  363.675991] init: plymouth-upstart-bridge main process (683) terminated with status 1
[  363.676026] init: plymouth-upstart-bridge main process ended, respawning
[  363.699261] init: plymouth-upstart-bridge main process (687) terminated with status 1
[  363.699276] init: plymouth-upstart-bridge main process ended, respawning
[  363.719639] init: plymouth-upstart-bridge main process (691) terminated with status 1
[  363.719656] init: plymouth-upstart-bridge main process ended, respawning
[  363.735234] init: plymouth-upstart-bridge main process (693) terminated with status 1
[  363.735250] init: plymouth-upstart-bridge main process ended, respawning
[  363.744578] init: plymouth-upstart-bridge main process (696) terminated with status 1
[  363.744593] init: plymouth-upstart-bridge respawning too fast, stopped
[  363.916851] init: friendly-recovery post-stop process (621) killed by INT signal
[  371.408113] usb 6-2: USB disconnect, device number 7
[  372.840051] usb 6-2: new low-speed USB device number 8 using uhci_hcd
[  373.016053] usb 6-2: New USB device found, idVendor=046d, idProduct=c077
[  373.016058] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  373.016062] usb 6-2: Product: USB Optical Mouse
[  373.016065] usb 6-2: Manufacturer: Logitech
[  373.031501] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input17
[  373.031648] hid-generic 0003:046D:C077.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[  379.762591] init: failsafe main process (945) killed by TERM signal
[  379.918424] type=1400 audit(1439836382.554:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1072 comm="apparmor_parser"
[  379.918434] type=1400 audit(1439836382.554:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1072 comm="apparmor_parser"
[  379.918953] type=1400 audit(1439836382.554:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1072 comm="apparmor_parser"
[  379.956602] type=1400 audit(1439836382.594:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1120 comm="apparmor_parser"
[  379.956612] type=1400 audit(1439836382.594:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1120 comm="apparmor_parser"
[  379.956618] type=1400 audit(1439836382.594:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1120 comm="apparmor_parser"
[  379.957150] type=1400 audit(1439836382.594:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1120 comm="apparmor_parser"
[  379.957157] type=1400 audit(1439836382.594:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1120 comm="apparmor_parser"
[  379.957435] type=1400 audit(1439836382.594:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1120 comm="apparmor_parser"
[  379.959945] type=1400 audit(1439836382.594:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1119 comm="apparmor_parser"
[  380.393594] Bluetooth: Core ver 2.17
[  380.393617] NET: Registered protocol family 31
[  380.393621] Bluetooth: HCI device and connection manager initialized
[  380.393631] Bluetooth: HCI socket layer initialized
[  380.393634] Bluetooth: L2CAP socket layer initialized
[  380.393640] Bluetooth: SCO socket layer initialized
[  380.411306] Bluetooth: RFCOMM TTY layer initialized
[  380.411324] Bluetooth: RFCOMM socket layer initialized
[  380.411333] Bluetooth: RFCOMM ver 1.11
[  380.473770] init: cups main process (1076) killed by HUP signal
[  380.473786] init: cups main process ended, respawning
[  380.534599] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  380.534605] Bluetooth: BNEP filters: protocol multicast
[  380.534617] Bluetooth: BNEP socket layer initialized
[  382.791425] init: samba-ad-dc main process (1412) terminated with status 1
[  382.808202] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[  382.912107] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[  382.912248] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  382.912592] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  404.643700] scsi 7:0:0:0: CD-ROM            CDEmu    Virt. CD/DVD-ROM 1.10 PQ: 0 ANSI: 0
[  404.646655] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[  404.647338] sr 7:0:0:0: Attached scsi CD-ROM sr1
[  404.647695] sr 7:0:0:0: Attached scsi generic sg3 type 5
[  405.202515] systemd-hostnamed[2323]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[  409.998726] audit_printk_skb: 87 callbacks suppressed
[  409.998731] type=1400 audit(1439836412.634:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2347 comm="apparmor_parser"
[  409.998741] type=1400 audit(1439836412.634:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2347 comm="apparmor_parser"
[  409.999261] type=1400 audit(1439836412.634:43): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2347 comm="apparmor_parser"
[  421.083104] EXT4-fs (sda1): Couldn't mount because of unsupported optional features (2000)
[  643.928911] e1000e: eth0 NIC Link is Up 10 Mbps Half Duplex, Flow Control: None
[  643.929074] e1000e 0000:00:19.0 eth0: Autonegotiated half duplex but link partner cannot autoneg.  Try forcing full duplex if link gets many collisions.
[  643.929077] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[  643.929113] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1210.824298] perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000